AFBR-57F5PZ Avago Technologies US Inc., AFBR-57F5PZ Datasheet - Page 16

• Manufacturer Part Number: AFBR-57F5PZ
• Description: 56T4982
• Manufacturer: Avago Technologies US Inc.

Specifications of AFBR-57F5PZ

• Applications: Fibre Channel And ISCSI HBA Cards
• Data Rate Max: 14.025Gbps
• Supply Voltage: 3.8V
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Table 14. EEPROM Serial ID Memory Contents – Soft Commands (Address A2h, Byte 110)
Notes:
1. The response time for soft commands of the AFBR-57F5PZ is 100msec as specifi ed by MSA SFF-8472.
2. Bit 6 is logic OR’d with the SFP TX_DISABLE input pin 3 …. either asserted will disable the SFP transmitter.
3. Bit 3 is logic OR’d with the SFP RS(0) RX Rate_Select input pin 7 …. either asserted will set receiver to Rate = High.
Table 15. EEPROM Serial ID Memory Contents – Soft Commands (Address A2h, Byte 111).
16
Bit #
7
6
5
4
3
2
1
0
Bit #
4-7
3
2
1
0
Status/Control Name
TX_DISABLE State
Soft TX_DISABLE Control
RS(1) State
RS(0) State
Soft RS(0) Control
TX_FAULT State
RX_LOS State
Data Ready (Bar)
Status/Control Name
Reserved
OWRAP FORWARD
Control Bit
OWRAP
Control Bit
EWRAP FORWARD
Control Bit
EWRAP
Control Bit
Description
Digital state of TX_DISABLE Input Pin (1 = TX_DISABLE asserted)
Read/write bit for changing digital state of TX_DISABLE function
Digital state of TX Rate_Select Input Pin RS(1) (1 = Rate High asserted)
Digital state of RX Rate_Select Input Pin RS(0) (1 = Rate High asserted)
Read/write bit for changing digital state of Rx Rate_Select RS(0) function
Digital state of TX_FAULT Output Pin (1 = TX_FAULT asserted)
Digital state of SFP RX_LOS Output Pin (1 = RX_LOS asserted)
Indicates transceiver is powered and real time sense data is ready
(0 = Data Ready)
Description
Logic Low = FORWARD disabled. Logic High = FORWARD enabled. When
used in combination with OWRAP enable, FORWARD routes incoming SFP
Rx optical data to both the Tx optical output and the Rx electrical output.
Enabling sets bit 2 and clears all other bits in byte 111.
Logic Low = OWRAP disabled. Logic High = OWRAP enabled. When
enabled, OWRAP routes incoming SFP Rx optical data to the Tx optical
output. Enabling clears all other bits in byte 111.
Logic Low = FORWARD disabled. Logic High = FORWARD enabled. When
used in combination with EWRAP enable, FORWARD routes incoming
SFP Tx electrical data to both Rx electrical output and Tx optical output.
Enabling sets bit 0 and clears all other bits in byte 111.
Logic Low = EWRAP disabled. Logic High = EWRAP enabled. When en-
abled, EWRAP routes incoming SFP Tx electrical data to the Rx electrical
output. Enabling clears all other bits in byte 111.
Notes
Note 1
Note 1, 2
Note 3
Note 1
Note 1
Notes