A43L0616BV-7F AMIC, A43L0616BV-7F Datasheet - Page 23
![58T1324](/photos/40/61/406110/ge56tsop07-40_sml.jpg)
A43L0616BV-7F
Manufacturer Part Number
A43L0616BV-7F
Description
58T1324
Manufacturer
AMIC
Datasheet
1.A43L0616BV-7F.pdf
(48 pages)
Specifications of A43L0616BV-7F
Memory Type
SDRAM
Memory Configuration
1M X 16
Access Time
6ns
Interface Type
LVTTL
Memory Case Style
TSOPII
No. Of Pins
50
Operating Temperature Range
0°C To +70°C
Frequency
143MHz
Rohs Compliant
Yes
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Part Number:
A43L0616BV-7F
Manufacturer:
AMIC
Quantity:
20 000
12. About Burst Type Control
13. About Burst Length Control
(February, 2008, Version 1.3)
Random
Random
Pseudo-
Interrupt
Special
MODE
MODE
MODE
MODE
MODE
MODE
MODE
Basic
Basic
(Interrupted by Precharge)
Pseudo-Binary Counting
Random column Access
Decrement Sequential
Sequential counting
Interleave counting
CAS
RAS Interrupt
t
CCD
Burst Stop
Full Page
Counting
Pseudo-
BRSW
= 1 CLK
Interrupt
1
2
4
8
At MRS A3=”0”. See the BURST SEQUENCE TABE.(BL=4,8)
BL=1,2,4,8 and full page wrap around.
At MRS A3=” 1”. See the BURST SEQUENCE TABE.(BL=4,8)
BL=4,8 At BL=1,2 Interleave Counting = Sequential Counting
At MRS A3 = “1”. (See to Interleave Counting Mode)
Starting Address LSB 3 bits A0-2 should be “000” or “111”.@BL=8.
--if LSB = “000” : Increment Counting.
--if LSB= “111” : Decrement Counting.
For Example, (Assume Addresses except LSB 3 bits are all 0, BL=8)
--@ write, LSB=”000”, Accessed Column in order 0-1-2-3-4-5-6-7
--@ read, LSB=”111”, Accessed Column in order 7-6-5-4-3-2-1-0
At BL=4, same applications are possible. As above example, at Interleave Counting
mode, by confining starting address to some values, Pseudo-Decrement Counting
Mode can be realized. See the BURST SEQUENCE TABLE carefully.
At MRS A3 = “0”. (See to Sequential Counting Mode)
Using Full Page Mode and Burst Stop Command, Binary Counting Mode can be
realized.
--@ Sequential Counting Accessed Column in order 3-4-5-6-7-1-2-3 (BL=8)
--@ Pseudo-Binary Counting,
Accessed Column in order 3-4-5-6-7-8-9-10 (Burst Stop command)
Note. The next column address of 256 is 0
Every cycle Read/Write Command with random column address can realize
Random Column Access.
That is similar to Extended Data Out (EDO) Operation of convention DRAM.
At MRS A2,1,0 = “000”.
At auto precharge, tRAS should not be violated.
At MRS A2,1,0 = “001”.
At auto precharge, tRAS should not be violated.
At MRS A2,1,0 = “111”.
Wrap around mode (Infinite burst length) should be stopped by burst stop,
At MRS A9=”1”.
Read burst = 1,2,4,8, full page/write Burst =1
At auto precharge of write, tRAS should not be violated.
t
Using burst stop command, it is possible only at full page burst length.
Before the end of burst, Row precharge command of the same bank
Stops read/write burst with Row precharge.
t
During read/write burst with auto precharge, RAS interrupt cannot be issued.
Before the end of burst, new read/write stops read/write burst and starts new
read/write burst or block write.
During read/write burst with auto precharge,
At MRS A2,1,0 = “010”
At MRS A2,1,0 = “011”.
RAS interrupt or
BDL
RDL
=1, Valid DQ after burst stop is 1,2 for CL=2,3 respectively
=2 with DQM, valid DQ after burst stop is 1,2 for CL=2,3 respectively
A0-2 = “111”. (See to Full Page Mode)
CAS
22
interrupt.
CAS
AMIC Technology, Corp.
interrupt can not be issued.
A43L0616B