S1D13705F00A200 Epson, S1D13705F00A200 Datasheet - Page 163

• Manufacturer Part Number: S1D13705F00A200
• Manufacturer: Epson

Specifications of S1D13705F00A200

• Operating Supply Voltage (typ): 3.3/5V
• Operating Temperature (min): -40C
• Operating Temperature (max): 85C
• Operating Temperature Classification: Industrial
• Package Type: TQFP
• Pin Count: 80
• Mounting: Surface Mount
• Operating Supply Voltage (min): 2.7V
• Operating Supply Voltage (max): 5.5V
• Lead Free Status / Rohs Status: Compliant

3: 1375SPLT DISPLAY UTILITY
3 1375SPLT D
3.1 1375SPLT
S1D13705 Supported Evaluation Platforms
Installation
PC Intel Platform
Embedded Platform
3-16
1375SPLT demonstrates S1D13705 split screen capability by showing two different areas of display
memory on the screen simultaneously.
Screen 1 memory is located at the start of the display buffer and is filled with horizontal bars. Screen
2 memory is located immediately after Screen 1 in the display buffer and is filled with vertical bars.
On either user input or elapsed time, the line compare register value is changed to adjust the amount
of display area taken up by each screen.
The 1375SPLT display utility must be configured and/or compiled to work with your hardware
platform. The program 1375CFG.EXE can be used to configure 1375SPLT. Consult the “1375CFG
CONFIGURATION PROGRAM”, document number X27A-B-001-01, for more information on
configuring S1D13705 utilities.
This software is designed to work in both embedded and personal computer (PC) environments. For
the embedded environment, it is assumed that the system has a means of downloading software from
the PC to the target platform. Typically, this is done by serial communications. The PC uses a
terminal program to send control commands and information to the target processor. Alternatively,
the PC can program an EPROM, which is then placed in the target platform. Some target platforms
can also communicate with the PC via a parallel port connection, or an Ethernet connection.
1375SPLT has been tested with the following S1D13705 supported evaluation platforms:
• PC system with an x86 processor. Both 16-bit and 32-bit code is supported.
• M68EC000IDP (Integrated Development Platform) board, revision 3.0, with a Motorola
• SH3-LCEVB board, revision B, with an Hitachi SH-3 HD6417780 processor.
If the platform you are using is different from the above, please see the “S1D13705 Programming
Notes and Examples manual”, document number X26A-G-002-01.
For 16-Bit Program Version: copy the file 1375SPLT.EXE to a directory that is in the DOS path on
your hard drive.
For 32-Bit Program Version: install the 32-bit Windows device driver S1D13XXX.VXD as
described in the S1D13XXX 32-Bit Windows Device Driver Installation Guide, document number
X00A-E-003-xx. Copy the file 1375SPLT.EXE to a directory that is in the DOS path on your hard
drive.
Download the program 1375SPLT to the system.
X27A-B-003-01
M68EC000 processor.
ISPLAY
EPSON
U
TILITY
S1D13705F00A UTILITIES (X27A-B-003-01)