S1D13705F00A200 Epson, S1D13705F00A200 Datasheet - Page 172

• Manufacturer Part Number: S1D13705F00A200
• Manufacturer: Epson

Specifications of S1D13705F00A200

• Operating Supply Voltage (typ): 3.3/5V
• Operating Temperature (min): -40C
• Operating Temperature (max): 85C
• Operating Temperature Classification: Industrial
• Package Type: TQFP
• Pin Count: 80
• Mounting: Surface Mount
• Operating Supply Voltage (min): 2.7V
• Operating Supply Voltage (max): 5.5V
• Lead Free Status / Rohs Status: Compliant

Program Messages
S1D13705F00A UTILITIES (X27A-B-005-01)
>>> WARNING: DID NOT DETECT S1D13705 <<<
The HAL was unable to read the revision code register on the S1D13705. Ensure that the S1D13705
hardware is installed and that the hardware platform has been configured correctly. Also check that
the display memory address has been configured correctly.
ERROR: Unable to locate/load S1D13XXX.VXD
1375PLAY was unable to load a required driver. The file S1D13XXX.VXD should be located in
x:\WINDOWS\SYSTEM or in x:\WINNT\SYSTEM. If the file is not there, install it as described in
the “S1D13XXX 32-Bit Windows Device Driver Installation Guide”, document number X00A-E-
003-xx.
ERROR: An IOCTL error occurred
This message indicates an error at the IO control layer occurred. The usual cause for this is an
incorrect hardware configuration.
ERROR: The HAL returned an unknown error
This message should never be displayed, it indicates that 1375PLAY is unable to determine the
cause of an error returned from the HAL.
EPSON
5: 1375PLAY DIAGNOSTIC UTILITY
3-25