S1D13705F00A200 Epson, S1D13705F00A200 Datasheet - Page 74

• Manufacturer Part Number: S1D13705F00A200
• Manufacturer: Epson

Specifications of S1D13705F00A200

• Operating Supply Voltage (typ): 3.3/5V
• Operating Temperature (min): -40C
• Operating Temperature (max): 85C
• Operating Temperature Classification: Industrial
• Package Type: TQFP
• Pin Count: 80
• Mounting: Surface Mount
• Operating Supply Voltage (min): 2.7V
• Operating Supply Voltage (max): 5.5V
• Lead Free Status / Rohs Status: Compliant

12.1.1 How to Set Up Default SwivelView Mode
Note: Vertical panning by a single line is not supported in Default SwivelView Mode.
S1D13705F00A HARDWARE FUNCTIONAL
SPECIFICATION (X27A-A-001-06)
The following describes the register settings needed to set up Default SwivelView Mode for a
240 320 8 bpp image:
• Select Default SwivelView Mode: REG[1Bh] bit 7 = 1 and bit 6 = 0
• The display refresh circuitry starts at pixel “B”, therefore the Screen 1 Start Address register must
• The Line Byte Count Register for SwivelView Mode must be set to the virtual-image width in
• Panning is achieved by changing the Screen 1 Start Address register:
• Increment the register by 1 to pan horizontally by one byte, e.g. one pixel in 8 bpp mode
• Increment the register by twice the effective value of the Line Byte Count register to pan vertically
be programmed with the address of pixel “B”, i.e.
bytes, i.e.
by two lines, e.g. add 200h to pan by two lines in the example above.
REG[10h], REG[0Dh], REG[0Ch]
REG 1Ch
Where bpp is bits-per-pixel and bpb is bits-per-byte.
=
Where bpb is bits-per-byte and bpp is bits-per-pixel.
----------------------------------------- -
8bpb
256
8bpp
EPSON
=
=
=
=
=
256
-------- -
AddressOfPixelB
AddressOfPixelA
AddressOfPixelA
AddressOfPixelA
1
=
256
=
00h
+
+
+
: see REG[1Ch] for explanation
EFh
ByteOffset
240pixels 8bpp
--------------------------------------------
8bpb
12: SWIVELVIEW MODE
–
1
1-65