ST72521R9 STMicroelectronics, ST72521R9 Datasheet - Page 14

• Manufacturer Part Number: ST72521R9
• Description: 8-BIT MCU WITH NESTED INTERRUPTS, FLASH, 10-BIT ADC, FIVE TIMERS, SPI, SCI, I2C, CAN INTERFACE
• Manufacturer: STMicroelectronics

Specifications of ST72521R9

• Hdflash Endurance: 100 cycles, data retention
• Clock Sources: crystal/ceramic resonator oscillators, internal RC oscillator and bypass for external clock
• Four Power Saving Modes: Halt, Active-Halt, Wait and Slow
• Main Clock Controller With: Real time base, Beep and Clock-out capabilities
• Two 16-bit Timers With: 2 input captures, 2 output compares, external clock input on one timer, PWM and pulse generator modes
• 8-bit Pwm Auto-reload Timer With: 2 input captures, 4 PWM outputs, output compare and time base interrupt, external clock with event detector

ST72F521, ST72521B
3 REGISTER & MEMORY MAP
As shown in
dressing 64K bytes of memories and I/O registers.
The available memory locations consist of 128
bytes of register locations, up to 2Kbytes of RAM
and up to 60Kbytes of user program memory. The
RAM space includes up to 256 bytes for the stack
from 0100h to 01FFh.
The highest address bytes contain the user reset
and interrupt vectors.
Figure 4. Memory Map
14/215
FFFFh
FFDFh
FFE0h
0080h
0FFFh
0000h
007Fh
0880h
087Fh
1000h
Interrupt & Reset Vectors
(2048 or 1024 Bytes)
Figure
Program Memory
HW Registers
(60K or 32K)
(see
(see
Reserved
RAM
Table
Table
4, the MCU is capable of ad-
2)
7)
or 047Fh
or 067Fh
or 087Fh
00FFh
01FFh
0080h
0100h
0200h
16-bit Addressing
Short Addressing
RAM (zero page)
256 Bytes Stack
IMPORTANT: Memory locations marked as “Re-
served” must never be accessed. Accessing a re-
seved area can have unpredictable effects on the
device.
Related Documentation
AN 985: Executing Code in ST7 RAM
RAM
1000h
8000h
FFFFh
60 KBytes
32 KBytes