L6935 STMicroelectronics, L6935 Datasheet - Page 12

• Manufacturer Part Number: L6935
• Description: High performance 3 A ULDO linear regulator
• Manufacturer: STMicroelectronics

Specifications of L6935

• Adjustable Output Voltage: 0.5 V to 3.0 V
• Excellent Load And Line Regulation: 1 % accuracy (over temperature)

Device description
5.2
5.3
5.4
5.4.1
12/20
Power Good
L6935 presents a PGOOD flag, an open drain output that is grounded during all the soft
start procedure, and is left free when V
An hysteresis of 10 % is also provided in order to avoid false triggering due to the noise
generated by the application.
Figure 10. Power good window
V
L6935 provides the flexibility to supply the internal logic (VBIAS) with a supply different than
the power input (VIN). The aim of this feature is to provide low-drop regulation still having
the supply voltage to correctly drive the internal power mosfet so optimizing the conversion.
VIN drives only the drain of the power DMOS and it can be kept as low as possible
(V
higher than V
Protections
L6935 is equipped with a set of protections in order to protect both the load and the device
from electrical overstress. Each protection does not latch the device, that returns to work
properly as the perturbation disappear.
Over-current protection
An over current protection is provided: if the current that flows through the power DMOS is
greater than 3.5 A, the device adjust the power DMOS driving voltage in order to keep
constant the delivered current (I
PGOOD to be set low.
Figure 11
device forces a lower output current (~3.5 A).
IN
IN
> V
vs V
OUT
show the way the OCP intervention: as the threshold value is reached by I
BIAS
+ V
IN
.
DROPmin
), while V
Figure 10
OUT
BIAS
). Anyhow the output may drop also causing the
drives the control section. V
OUT
shows the PGOOD commutations.
reaches 90 % of the programmed value.
BIAS
must be typically
OUT
L6935
, the