968137-5 TE Connectivity, 968137-5 Datasheet - Page 10

• Manufacturer Part Number: 968137-5
• Manufacturer: TE Connectivity

Specifications of 968137-5

• Wire/cable Type: FLR (Thin Walled Cable)
• Product Type: Contact
• Termination Method To Wire/cable: Crimp
• Sealed: No
• Insulation Diameter (mm [in]): 2.20-3.00 [.086-.118]
• Cable Type: FLR (Thin Walled Cable)
• Tab Width (mm [in]): 2.79 [0.11]
• Wire Range (mm [awg]): 1.00-2.50² [17-13]
• Staggered Centerline: Without
• Wire Type: Stranded
• Mates With Centerline: 5.08 x 5.08 [.200 x .200]
• Contact Type: Tab
• Tab Contact Size: 2.8
• Contact Finish: Gold
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Applies To: Wire/Cable
• Packaging Method: Strip
• Packaging Quantity: 4,000

Rev. B
4.3 Electrical
4.3.1 Test Equipment for Current Heating and Contact Resistance
Maximum current
carrying capacity for
crimp contact,
"in free air"
Current carrying
capacity
"contacts in housing"
Contact resistance
Crimp resistance
(derating)
TEST DESCRIPTION
R
MPQ max. 34 A
PQ max. 45A
MPQ max. 26A
PQ max. 37A
The values may vary,
depending on the
application and version;
see the examples in the
specification. If no
comparable examples
exist, the user must test
each individual case (or
have it tested).
Requirements
0.9m
K
< 4 m
Crimp Connection
Conditions of test:
No-load voltage < 20 mV
Test current < 100mA
Measure the contact resistance in new condition in
accordance with IEC 512-2 / DIN 41640 Part 4
(test equipment: see section 4.3.1)
Measure in accordance with DIN IEC 352 P.2
Test equipment: see section 4.3.1
Contact in free air, wire range MPQ 2.5mm², PQ 4.0mm²
at room temperature.
Measure in accordance with IEC 512-3 / DIN 41 640 P.3
Contacts engaged in housing cavities
Measure in accordance with IEC 512-3 / DIN 41 640 P.3
PROCEDURE
108-18476-1
10
of
25