IR3086AMTR International Rectifier, IR3086AMTR Datasheet - Page 31
IR3086AMTR
Manufacturer Part Number
IR3086AMTR
Description
XPHASE Phase IC with OVP with fault overtemp detect. The IR3086AM Phase IC combined with an IR XPhase TM Control IC provides a full featured and flexible way to implement power solutions for the latest high performance CPUs and ASICs.
Manufacturer
International Rectifier
Datasheet
1.IR3086AM.pdf
(33 pages)
Specifications of IR3086AMTR
Package
20-Lead MLPQ
Circuit
X-Phase Phase IC
Iout (a)
2.5A Gate Driver
Pbf
PbF Option Available
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Solder Resist
The solder resist should be pulled away from the metal lead lands and center pad by a minimum of 0.06mm.
The minimum solder resist width is 0.13mm. At the inside corner of the solder resist where the lead land
Ensure that the solder resist in-between the lead lands and the pad land is ≥ 0.15mm due to the high aspect
The 4 vias in the land pad should be tented with solder resist 0.4mm diameter, or 0.1mm larger than the
The solder resist mis-alignment is a maximum of 0.05mm and it is recommended that the lead lands are all
Non Solder Mask Defined (NSMD). Therefore, pulling the S/R 0.06mm will always ensure NSMD pads.
groups meet, it is recommended to provide a fillet so a solder resist width of ≥ 0.17mm remains.
ratio of the solder resist strip separating the lead lands from the pad land.
diameter of the via.
Page 31 of 33
IR3086A
2/13/09