AT91SAM9M10 ATMEL Corporation, AT91SAM9M10 Datasheet - Page 31

• Manufacturer Part Number: AT91SAM9M10
• Description: At91 Arm Thumb-based Microcontrollers
• Manufacturer: ATMEL Corporation

8. System Controller
8.1
6355AS–ATARM–06-Jan-10
System Controller Mapping
The System Controller is a set of peripherals that allows handling of key elements of the system,
such as power, resets, clocks, time, interrupts, watchdog, etc.
The System Controller User Interface also embeds the registers that configure the Matrix and a
set of registers for the chip configuration. The chip configuration registers configure the EBI chip
select assignment and voltage range for external memories.
The System Controller’s peripherals are all mapped within the highest 16 KBytes of address
space, between addresses 0xFFFF E800 and 0xFFFF FFFF.
However, all the registers of the System Controller are mapped on the top of the address space.
All the registers of the System Controller can be addressed from a single pointer by using the
standard ARM instruction set, as the Load/Store instruction have an indexing mode of ±4 KB.
Figure 8-1 on page 32
Figure 7-1 on page 24
peripherals.
shows the System Controller block diagram.
shows the mapping of the User Interfaces of the System Controller
AT91SAM9M10
31