GS1532 Gennum Corporation, GS1532 Datasheet - Page 5
![no-image](/images/manufacturer_photos/0/2/277/gennum_corporation_sml.jpg)
GS1532
Manufacturer Part Number
GS1532
Description
Serializer For HD-SDI, Sd-sdi & DVB-ASI. 3.3/1.8V Supply.
Manufacturer
Gennum Corporation
Datasheet
1.GS1532.pdf
(33 pages)
1.2 PIN DESCRIPTIONS
GENNUM CORPORATION
NUMBER
PIN
11
12
13
1
2
3
9
IOPROC_EN/DIS
20bit/10bit
PD_GND
DVB_ASI
CP_VDD
PD_VDD
SD/HD
NAME
Synchronous
Synchronous
Synchronous
Synchronous
TIMING
Analog
Analog
Analog
Non
Non
Non
Non
Input Power
Input Power
Input Power
TYPE
Input
Input
Input
Input
5
Power supply connection for the charge pump 3.3V DC
GND pin for the phase detector
Power supply for the Phase Detector 1.8V DC
CONTROL SIGNAL INPUT
Signal levels are LVCMOS / LVTTL compatible.
When set HIGH, the device will be configured for the transmission
of DVB-ASI data in SDTV mode, (SD/HD must be HIGH and
SMPTE_BYPASS must be LOW).
When set LOW, the device will not support the encoding of DVB-
ASI data.
CONTROL SIGNAL INPUT
Signal levels are LVCMOS / LVTTL compatible.
Used to select the current video rate as either 1.484 Gb/s HDTV or
270Mb/s SDTV. When SD/HD is HIGH, the mode is 270Mb/s.
The setting of this pin also determines the parallel input / output
clock rate and the slew rate of the cable driver output.
CONTROL SIGNAL INPUT
Signal levels are LVCMOS / LVTTL compatible.
Used to select the input bus width in SMPTE or Data-Through
modes.
CONTROL SIGNAL INPUT
Signal levels are LVCMOS / LVTTL compatible.
Used to enable or disable I/O processing features
When IOPROC_EN/DIS is HIGH, the following I/O processing
features of the device are enabled.
•
•
•
•
•
•
To enable a subset of these features keep IOPROC_EN/DIS HIGH
and disable features in the host iterface.
When IOPROC_EN/DIS is LOW, the I/O processing features of the
device are disabled, regardless of whether the features are
enabled in the host interface.
TRS insertion
Line CRC insertion (HD-only)
Line Number insertion (HD-only)
Ancillary data checksum insertion
EDH CRC insertion (SD-only)
8b/10b encoding (DVB-ASI only)
DESCRIPTION
21498 - 0