WM8959 Wolfson Microelectronics Ltd., WM8959 Datasheet - Page 84

• Manufacturer Part Number: WM8959
• Description: Mobile Multimedia DAC with Dual-mode Class AB/D Speaker Driver
• Manufacturer: Wolfson Microelectronics Ltd.

WM8959
w
SERIAL DATA OUTPUT (REGISTER READBACK)
The GPIO pins can be configured to output serial data during register readback in 3-wire (open-drain)
or 4-wire mode. The readback mode is configured using the register bits RD_3W_ENA and
MODE_3W4W as described in Table 48.
Setting the RD_3W_ENA bit to 1 enables 3-wire readback using the SDIN pin in open-drain mode.
Setting the RD_3W_ENA bit to 0 requires the use of a GPIO pin as SDOUT. To enable SDOUT on a
GPIO pin, the following register settings are required:
The register fields used to configure SDOUT on the GPIO pins are described in Table 48. Refer to
“Control Interface” for more details of 3-wire and 4-wire interfacing.
Table 48 GPIO 3-Wire Readback Enable
R22 (16h)
REGISTER
ADDRESS
•
•
•
•
•
•
GPIO1_ENA = 1 (only required if using GPIO1)
AIF_SEL = 0 (only required if using GPIO3, GPIO4 or GPIO5)
AIF_TRIS = 0
GPIOn_SEL = 0110 for the selected SDOUT output pin
GPIOn_PU = 0 for the selected SDOUT output pin
GPIOn_PD = 0 for the selected SDOUT output pin
15
14
BIT
RD_3W_ENA
MODE_3W4W
LABEL
1b
0b
DEFAULT
3- / 4-wire readback configuration
1 = 3-wire mode
0 = 4-wire mode, using GPIO pin
3-wire mode
4-wire mode
0 = push 0/1
1 = open-drain
0 = push 0/1
1 = wired-OR
DESCRIPTION
PP, May 2008, Rev 3.1
Pre-Production
84