MT9M413 Micron Technology, MT9M413 Datasheet - Page 16

• Manufacturer Part Number: MT9M413
• Description: 1.3-MEGAPIXEL CMOS ACTIVE-PIXEL DIGITAL IMAGE SENSOR
• Manufacturer: Micron Technology

www.DataSheet4U.com
Table 3:
09005aef806807ca
MT9M413C36STC.fm - Ver. 3.0 1/04 EN
PIN NUMBER(S)
R16
L4
M3
L18, P16, J17
L16
E5,C3,C1, D2,
E1,F2, F3, G1, H1,
J2, J1, K1, M1, N1,
N2, P1,R1, R2, T3,
U2, R5, U3, V2,
W2, W1, V4, W5,
W6, W8, W9,
W10,W12, W14,
W15, W17, W18,
V17, R15, U17,
V19, W19, U19,
T19, R19, P19,
N18, N19, M19,
M17, L19, K19,
J19, H19, G19,
F19, E19, D19,
C19, B19, C18,
E15, C17, D16,
A19, A17, A15,
A14, A13, A11,
A10, B9, B7, B6,
A4, E7, A2, C4, B3,
W16, G2
Pin Description (Continued)
SIGNAL NAME
VLP_DRV
TX_N
PG_N
VRST_PIX
VREF4
FUNCTION
Should be connected to AGND.
This is an active low pulse that controls transfer of charge from
photodetector to memory inside each pixel for entire pixel array.
This is an active low pulse that resets the photodetectors and
thereby starts new integration cycle.
Power supply for pixel array. There is no noticeable dc power
consumption by this pin (<100µA). User voltage source must supply
a transient current of 10mA at a frequency of 500 kHz, once a
frame. Decoupling capacitors to AGND ~1µF (ceramic) and 100µF
(electrolytic) are usually sufficient to filter out this required current
transient.
ADC reference input value should be 1/4 VREF1. User voltage source
must supply a transient current of 100mA at a frequency of 500 kHz
with a 2% duty cycle. A ceramic decoupling capacitor to AGND of
~0.1µF is usually sufficient to filter out this required current
transient.
No connect.
1.3-MEGAPIXEL CMOS ACTIVE-PIXEL
16
Micron Technology, Inc., reserves the right to change products or specifications without notice.
DIGITAL IMAGE SENSOR
©2004 Micron Technology, Inc. All rights reserved.