SC16C554DB NXP Semiconductors, SC16C554DB Datasheet - Page 32
![no-image](/images/manufacturer_photos/0/4/487/nxp_semiconductors_sml.jpg)
SC16C554DB
Manufacturer Part Number
SC16C554DB
Description
5 V 3.3 V and 2.5 V quad UART - 5 Mbit/s (max.) with 16-byte FIFOs
Manufacturer
NXP Semiconductors
Datasheet
1.SC16C554DB.pdf
(51 pages)
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Part Number:
SC16C554DB
Manufacturer:
NXP/恩智浦
Quantity:
20 000
Company:
Part Number:
SC16C554DBIA68
Manufacturer:
NXP
Quantity:
116
Part Number:
SC16C554DBIA68
Manufacturer:
PHILIPS/飞利浦
Quantity:
20 000
Company:
Part Number:
SC16C554DBIA68,529
Manufacturer:
NXP Semiconductors
Quantity:
10 000
Company:
Part Number:
SC16C554DBIB64
Manufacturer:
NXP
Quantity:
595
Part Number:
SC16C554DBIB64
Manufacturer:
NXP/恩智浦
Quantity:
20 000
Company:
Part Number:
SC16C554DBIB64,128
Manufacturer:
NXP Semiconductors
Quantity:
10 000
Company:
Part Number:
SC16C554DBIB64,151
Manufacturer:
NXP Semiconductors
Quantity:
10 000
Company:
Part Number:
SC16C554DBIB64,157
Manufacturer:
NXP Semiconductors
Quantity:
10 000
Philips Semiconductors
9397 750 13133
Product data sheet
7.8 Modem Status Register (MSR)
Table 20:
This register provides the current state of the control interface signals from the modem, or
other peripheral device to which the SC16C554B/554DB is connected. Four bits of this
register are used to indicate the changed information. These bits are set to a logic 1
whenever a control input from the modem changes state. These bits are set to a logic 0
whenever the CPU reads this register.
Table 21:
Bit
0
Bit
7
6
5
4
3
2
Symbol
LSR[0]
Symbol
MSR[7]
MSR[6]
MSR[5]
MSR[4]
MSR[3]
MSR[2]
Line Status Register bits description
Modem Status Register bits description
5 V, 3.3 V and 2.5 V quad UART, 5 Mbit/s (max.) with 16-byte FIFOs
Description
Receive data ready.
Description
CD (active HIGH, logical 1). Normally this bit is the complement of the CD
input. In the loop-back mode this bit is equivalent to the OP2 bit in the MCR
register.
RI (active HIGH, logical 1). Normally this bit is the complement of the RI
input. In the loop-back mode this bit is equivalent to the OP1 bit in the MCR
register.
DSR (active HIGH, logical 1). Normally this bit is the complement of the DSR
input. In loop-back mode this bit is equivalent to the DTR bit in the MCR
register.
CTS (active HIGH, logical 1). CTS functions as hardware flow control signal
input if it is enabled via MCR[5]. Flow control (when enabled) allows starting
and stopping the transmissions based on the external modem CTS signal. A
logic 1 at the CTS pin will stop SC16C554B/554DB transmissions as soon
as current character has finished transmission. Normally MSR[4] is the
complement of the CTS input. However, in the loop-back mode, this bit is
equivalent to the RTS bit in the MCR register.
Logic 0 = No data in receive holding register or FIFO (normal default
condition).
Logic 1 = Data has been received and is saved in the receive holding
register or FIFO.
CD
RI
Logic 0 = No CD change (normal default condition).
Logic 1 = The CD input to the SC16C554B/554DB has changed state
since the last time it was read. A modem Status Interrupt will be
generated.
Logic 0 = No RI change (normal default condition).
Logic 1 = The RI input to the SC16C554B/554DB has changed from a
logic 0 to a logic 1. A modem Status Interrupt will be generated.
Rev. 01 — 9 February 2005
[1]
[1]
…continued
SC16C554B/554DB
© Koninklijke Philips Electronics N.V. 2005. All rights reserved.
www.DataSheet4U.com
32 of 51