MX29LV320MB Macronix International, MX29LV320MB Datasheet - Page 30

• Manufacturer Part Number: MX29LV320MB
• Description: 32M-BIT [4M x 8/2M x 16] SINGLE VOLTAGE 3V ONLY FLASH MEMORY
• Manufacturer: Macronix International

P/N:PM1129
ABSOLUTE MAXIMUM RATINGS
Storage Temperature
Plastic Packages . . . . . . . . . . . . . ..... -65
Ambient Temperature
with Power Applied. . . . . . . . . . . . . .... -65
Voltage with Respect to Ground
Output Short Circuit Current (Note 3) . . . . . . 200 mA
Notes:
1. Minimum DC voltage on input or I/O pins is -0.5 V.
2. Minimum DC input voltage on pins A9, OE#, and
3. No more than one output may be shorted to ground at
Stresses above those listed under "Absolute Maximum
Ratings" may cause permanent damage to the device.
This is a stress rating only; functional operation of the
device at these or any other conditions above those indi-
cated in the operational sections of this data sheet is not
implied. Exposure of the device to absolute maximum
rating conditions for extended periods may affect device
reliability.
VCC (Note 1) . . . . . . . . . . . . . . . . . -0.5 V to +4.0 V
A9, OE#, and
RESET# (Note 2) . . . . . . . . . . . ....-0.5 V to +12.5 V
All other pins (Note 1) . . . . . . . -0.5 V to VCC +0.5 V
During voltage transitions, input or I/O pins may over-
shoot VSS to -2.0 V for periods of up to 20 ns. Maxi-
mum DC voltage on input or I/O pins is VCC +0.5 V.
During voltage transitions, input or I/O pins may over-
shoot to VCC +2.0 V for periods up to 20ns.
RESET# is -0.5 V. During voltage transitions, A9, OE#,
and RESET# may overshoot VSS to -2.0 V for periods
of up to 20 ns. Maximum DC input voltage on pin A9 is
+12.5 V which may overshoot to 14.0 V for periods up
to 20 ns.
a time. Duration of the short circuit should not be greater
than one second.
o
o
C to +150
C to +125
o
o
C
C
30
OPERATING RATINGS
Commercial (C) Devices
Ambient Temperature (T
Industrial (I) Devices
Ambient Temperature (T
VCC Supply Voltages
VCC for full voltage range. . . . . .. . . . . . +2.7 V to 3.6 V
VCC for regulated voltage range. . . . . . . +3.0 V to 3.6 V
Operating ranges define those limits between which the
functionality of the device is guaranteed.
MX29LV320MT/B
A
A
). . . . . . . . . . . -40 C to +85 C
). . . . . . . . . . . . . 0 C to +70 C
REV. 1.1 , JUL. 14, 2005
www.DataSheet4U.com