fs3861 Fortune Semiconductor Corporation, fs3861 Datasheet - Page 16

• Manufacturer Part Number: fs3861
• Description: Intelligent Charger Management Controller
• Manufacturer: Fortune Semiconductor Corporation

Fortune Semiconductor Corp.
bit 2
bit 1
bit 0
WORK
bit7~0
INTF, INTE: ADDRESS 06H, 07H
bit7
bit6~5
bit4
bit3
bit2
bit1
bit0
DC: Digit Carry Flag (ADDWF, SUBWF instructions)
1 = A carry-out from the 4th low order bit of the result occurred
0 = No carry-out from the 4th low order bit of the result
C: Carry Flag (~Borrow)
Z: Zero Flag
1 = The result of an arithmetic or logic operation is zero
0 = The result of an arithmetic or logic operation is not zero
: ADDRESS 05H
Store temporary data
GIE: Global interrupt enable (Address 07H)
unimplemented
NORMIF, NORMIE: VDD within normal working range (4.35V~5.5V) Interrupt flag and enable.
NORMIF can wake up MCU if MCU is in sleep mode.
OVLOIF, OVLOIE: VDD over normal working range (VDD>5.5V) Interrupt flag and enable.
UVLOIF, UVLOIE: VDD under normal working range (VDD<4.35V) Interrupt flag and enable.
VDDIF, VDDIE: VDD > VBAT Interrupt flag and enable. Used when there is only VBAT and VDD is
off. VDDIF can wake up MCU if MCU is in sleep mode.
TMIF, TMIE: 16-bit Timer Interrupt flag and enable.
GIE
bit7
-
bit6
-
-
bit5
-
-
NORMIE OVLOIE UVLOIE VDDIE
NORMIF OVLOIF UVLOIF VDDIF
bit4
16/34
bit3
bit2
bit1
TMIF
TMIE
bit0
FS3861
Rev. 1.0