74HCT7273N,112 NXP Semiconductors, 74HCT7273N,112 Datasheet - Page 16

• Manufacturer Part Number: 74HCT7273N,112
• Description: IC OCTAL D FF POS-EDGE OD 20-DIP
• Manufacturer: NXP Semiconductors
• Series: 74HCTr
• Type: D-Type Busr

Specifications of 74HCT7273N,112

• Package / Case: 20-DIP (0.300", 7.62mm)
• Function: Master Reset
• Output Type: Non-Inverted
• Number Of Elements: 1
• Number Of Bits Per Element: 8
• Frequency - Clock: 56MHz
• Delay Time - Propagation: 16ns
• Trigger Type: Positive Edge
• Voltage - Supply: 4.5 V ~ 5.5 V
• Operating Temperature: -40°C ~ 125°C
• Mounting Type: Through Hole
• Number Of Circuits: 1
• Logic Family: HCT
• Logic Type: D-Type Edge Triggered Flip-Flop
• Polarity: Non-Inverting
• Input Type: Single-Ended
• Propagation Delay Time: 16 ns
• Supply Voltage (max): 5.5 V
• Maximum Operating Temperature: + 125 C
• Mounting Style: Through Hole
• Minimum Operating Temperature: - 40 C
• Supply Voltage (min): 4.5 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Current - Output High, Low: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 568-2903-5; 935024070112

Philips Semiconductors
Suitability of through-hole mount IC packages for dipping and wave soldering methods
Note
1. For SDIP packages, the longitudinal axis must be parallel to the transport direction of the printed-circuit board.
DEFINITIONS
LIFE SUPPORT APPLICATIONS
These products are not designed for use in life support appliances, devices, or systems where malfunction of these
products can reasonably be expected to result in personal injury. Philips customers using or selling these products for
use in such applications do so at their own risk and agree to fully indemnify Philips for any damages resulting from such
improper use or sale.
1999 Oct 01
DBS, DIP, HDIP, SDIP, SIL
Data sheet status
Objective specification
Preliminary specification
Product specification
Limiting values
Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or
more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation
of the device at these or at any other conditions above those given in the Characteristics sections of the specification
is not implied. Exposure to limiting values for extended periods may affect device reliability.
Application information
Where application information is given, it is advisory and does not form part of the specification.
Octal D-type flip-flop with reset; positive
edge-trigger; open drain outputs
PACKAGE
This data sheet contains target or goal specifications for product development.
This data sheet contains preliminary data; supplementary data may be published later.
This data sheet contains final product specifications.
suitable
DIPPING
16
SOLDERING METHOD
suitable
(1)
WAVE
Product specification
74HCT7273