20ll04da1 Pacer Components, 20ll04da1 Datasheet - Page 22

• Manufacturer Part Number: 20ll04da1
• Description: Vacuum Fluorescent Display Module
• Manufacturer: Pacer Components

2*20 VF Display Module
8.9 Move Cursor to Specified Position
8.10 Clear Display Screen, and Clear String Mode
8.11 Clear Cursor Line, and Clear String Mode
8.12 Initialize Display
8.13 Select Peripheral Device(s)
8.14 Select/Cancel User-defined Characters
ASCII Format
ASCII Format <CLR>
ASCII Format <CAN>
ASCII Format <ESC> @
ASCII Format <ESC> = n
ASCII Format <ESC> % n
Hex. Format
Dec. Format
Hex. Format
Hex. Format
Hex. Format
Hex. Format
Dec. Format
Dec. Format
Dec. Format
Dec. Format
Dec. Format
Hex. Format
Description
Description
Description
Description
Description
Description
the cursor does not move. (range: 1 < x < 20, y = 1 or 2)
The data in the receive buffer is not cleared. After initializing the display, the display screen is cleared
and the cursor moves to the home position.
defined using the "<ESC> &" command, the internal character set is displayed.
case, this command has no effect on the user-defined characters that have already been defined using the
"<ESC> &" command.
31, 36, x, y
Moves the cursor to the nth column on the mth line.
12
[0Ch]
Clears all the displayed characters.
24
[18h]
Clears the line containing the cursor.
27, 64
[1Bh] [40h]
Resets the various display settings to their initial values.
27, 61, n
[1Bh] [3Dh] n
Select peripheral device(s)
27, 37, n
[1Bh] [25h] n
After the command is executed, the cursor moves to the home position.
* When a window is defined, the cursor is moved only within the current window.
After this command is executed, the cursor moves to the left-most position on the current line.
* When a window is defined, the cursor is moved only within the current window.
The software settings are reset to their power-on values. The jumper switches are not checked again.
<US> $ x y
[1Fh] [24h] x y
If a value exceeding the range is specified for x (column) and/or y (line), this command is ignored and
Selects or cancels the user-defined character set. (n = 0 or 1, default n=0)
When n is 1, the user-defined character set is selected. When the user-defined character set is not
When n is 0, the user-defined character set is canceled. (The internal character set is selected.) In this
This command has no effect on the characters already displayed.
* n=01h, enable printer, disable display
* n=02h, disable printer, enable display
* n=03h, enable printer, enable display
* n=04h, display message for customer side (Display data can be accepted when J1 is opened.)
* n=05h, display message for operator side (Display data can be accepted when J1 is closed.)
20LL04DA1 (Rev. 5.0)
Page 22 of 41
<ESC> l x y
31, 108, x, y
[1Bh] [6Ch] x y
<ESC> P x y
31, 80, x, y
[1Bh] [50h] x y