as8510 austriamicrosystems, as8510 Datasheet - Page 5

• Manufacturer Part Number: as8510
• Description: Data Acquisition Device For Battery Sensors
• Manufacturer: austriamicrosystems

AS8510
Datasheet - P i n A s s i g n m e n t s
Table 1. Pin Descriptions
www.austriamicrosystems.com/AS8510
Pin Number
14
15
16
17
18
19
20
CHOP_CLK
Pin Name
DVDD
DVSS
MEN
CLK
SDI
INT
Digital output
Digital output
Digital input
Supply pad
Digital I/O
Pin Type
Revision 3.4
0V Digital Ground
+3.3V Digital Supply
Chop Clock used in High side measurements to synchronize
external chopper.
(As an example, when AS8525 is used to condition the input
signal to the input range of AS8510, the chop clock is used by
AS8525.)
Digital output issued during the Standby Mode (SBM) to signal
the short duration of data sampling. This signal is useful in the
case of a High Side Measurement application.
(For example: This signal is used by AS8525 device to wake-up
and enable the measurement path.)
Data signal (SPI Interface)
By default this pin is the internal clock output which can be used
by a Microcontroller. The internal clock may also be disabled as
an output by programming Register 08. To use an external Clock,
Register 08 has to be programmed.
Active High Interrupt to indicate data is ready
Description
5 - 46