mc68hc908gr8a Freescale Semiconductor, Inc, mc68hc908gr8a Datasheet - Page 150

• Manufacturer Part Number: mc68hc908gr8a
• Description: M68hc08 Microcontrollers Microcontroller
• Manufacturer: Freescale Semiconductor, Inc

Serial Communications Interface (SCI) Module
R8 — Received Bit 8
T8 — Transmitted Bit 8
ORIE — Receiver Overrun Interrupt Enable Bit
NEIE — Receiver Noise Error Interrupt Enable Bit
FEIE — Receiver Framing Error Interrupt Enable Bit
PEIE — Receiver Parity Error Interrupt Enable Bit
13.8.4 SCI Status Register 1
SCI status register 1 (SCS1) contains flags to signal these conditions:
150
When the SCI is receiving 9-bit characters, R8 is the read-only ninth bit (bit 8) of the received
character. R8 is received at the same time that the SCDR receives the other 8 bits.
When the SCI is receiving 8-bit characters, R8 is a copy of the eighth bit (bit 7). Reset has no effect
on the R8 bit.
When the SCI is transmitting 9-bit characters, T8 is the read/write ninth bit (bit 8) of the transmitted
character. T8 is loaded into the transmit shift register at the same time that the SCDR is loaded into
the transmit shift register. Reset has no effect on the T8 bit.
This read/write bit enables SCI error CPU interrupt requests generated by the receiver overrun bit, OR.
This read/write bit enables SCI error CPU interrupt requests generated by the noise error bit, NE.
Reset clears NEIE.
This read/write bit enables SCI error CPU interrupt requests generated by the framing error bit, FE.
Reset clears FEIE.
This read/write bit enables SCI error CPU interrupt requests generated by the parity error bit, PE. See
13.8.4 SCI Status Register
•
•
•
•
•
•
•
•
1 = SCI error CPU interrupt requests from OR bit enabled
0 = SCI error CPU interrupt requests from OR bit disabled
1 = SCI error CPU interrupt requests from NE bit enabled
0 = SCI error CPU interrupt requests from NE bit disabled
1 = SCI error CPU interrupt requests from FE bit enabled
0 = SCI error CPU interrupt requests from FE bit disabled
1 = SCI error CPU interrupt requests from PE bit enabled
0 = SCI error CPU interrupt requests from PE bit disabled
Transfer of SCDR data to transmit shift register complete
Transmission complete
Transfer of receive shift register data to SCDR complete
Receiver input idle
Receiver overrun
Noisy data
Framing error
Parity error
MC68HC908GR8A • MC68HC908GR4A Data Sheet, Rev. 5
1. Reset clears PEIE.
Freescale Semiconductor