dp83846a National Semiconductor Corporation, dp83846a Datasheet - Page 34

• Manufacturer Part Number: dp83846a
• Description: Dsphyter ? Single 10/100 Ethernet Transceiver
• Manufacturer: National Semiconductor Corporation

This register contains the advertised abilities of the Link Partner as received during Auto-Negotiation. The content
changes after the successful autonegotiation if Next-pages are supported.
12:10
4:0
Bit
15
14
13
9
8
7
6
5
Table 12. Auto-Negotiation Link Partner Ability Register (ANLPAR) (BASE Page), address 0x05
RESERVED
Bit Name
Selector
TX_FD
10_FD
ACK
NP
RF
TX
T4
10
<0 0000>, RO
Default
0, RO
0, RO
0, RO
0, RO
0, RO
0, RO
0, RO
0, RO
0, RO
Next Page Indication:
0 = Link Partner does not desire Next Page Transfer.
1 = Link Partner desires Next Page Transfer.
Acknowledge:
1 = Link Partner acknowledges reception of the ability data word.
0 = Not acknowledged.
The Device's Auto-Negotiation state machine will automatically
control the this bit based on the incoming FLP bursts.
Remote Fault:
1 = Remote Fault indicated by Link Partner.
0 = No Remote Fault indicated by Link Partner.
RESERVED for Future IEEE use:
Write as 0, read as 0.
100BASE-T4 Support:
1 = 100BASE-T4 is supported by the Link Partner.
0 = 100BASE-T4 not supported by the Link Partner.
100BASE-TX Full Duplex Support:
1 = 100BASE-TX Full Duplex is supported by the Link Partner.
0 = 100BASE-TX Full Duplex not supported by the Link Partner.
100BASE-TX Support:
1 = 100BASE-TX is supported by the Link Partner.
0 = 100BASE-TX not supported by the Link Partner.
10BASE-T Full Duplex Support:
1 = 10BASE-T Full Duplex is supported by the Link Partner.
0 = 10BASE-T Full Duplex not supported by the Link Partner.
10BASE-T Support:
1 = 10BASE-T is supported by the Link Partner.
0 = 10BASE-T not supported by the Link Partner.
Protocol Selection Bits:
Link Partner’s binary encoded protocol selector.
34
Description
www.national.com