ata6603 ATMEL Corporation, ata6603 Datasheet - Page 100

• Manufacturer Part Number: ata6603
• Description: Microcontroller With Lin Transceiver, 5v Regulator And Watchdog
• Manufacturer: ATMEL Corporation

100
ATA6602/ATA6603
• SDA/ADC4/PCINT12 – Port C, Bit 4
• ADC3/PCINT11 – Port C, Bit 3
• ADC2/PCINT10 – Port C, Bit 2
• ADC1/PCINT9 – Port C, Bit 1
• ADC0/PCINT8 – Port C, Bit 0
SDA, 2-wire Serial Interface Data: When the TWEN bit in TWCR is set (one) to enable the
2-wire Serial Interface, pin PC4 is disconnected from the port and becomes the Serial Data
I/O pin for the 2-wire Serial Interface. In this mode, there is a spike filter on the pin to sup-
press spikes shorter than 50 ns on the input signal, and the pin is driven by an open drain
driver with slew-rate limitation.
PC4 can also be used as ADC input Channel 4. Note that ADC input channel 4 uses digital
power.
PCINT12: Pin Change Interrupt source 12. The PC4 pin can serve as an external interrupt
source.
PC3 can also be used as ADC input Channel 3. Note that ADC input channel 3 uses analog
power.
PCINT11: Pin Change Interrupt source 11. The PC3 pin can serve as an external interrupt
source.
PC2 can also be used as ADC input Channel 2. Note that ADC input channel 2 uses analog
power.
PCINT10: Pin Change Interrupt source 10. The PC2 pin can serve as an external interrupt
source.
PC1 can also be used as ADC input Channel 1. Note that ADC input channel 1 uses analog
power.
PCINT9: Pin Change Interrupt source 9. The PC1 pin can serve as an external interrupt
source.
PC0 can also be used as ADC input Channel 0. Note that ADC input channel 0 uses analog
power.
PCINT8: Pin Change Interrupt source 8. The PC0 pin can serve as an external interrupt
source.
4921D–AUTO–08/07