sc60021rm Staco Energy Products Co., sc60021rm Datasheet - Page 3

• Manufacturer Part Number: sc60021rm
• Description: Parallel Redundancy/capacity On-line Ups
• Manufacturer: Staco Energy Products Co.

1 Important Safety Instruction
1.1. An Important Notice
For Parallel System installation, please refer to Parallel System Installation
Guide Part number 003-2302
Because of “small leakage currents” generated by the EMI filter of the UPS,
it is necessary to insure that the UPS is properly grounded before
connecting AC power to the input.
To ensure safety in all applications where a UPS is hard wired to the
Electrical Supply, ensure that the system is installed by a Qualified Electrical
Contractor.
The UPS has its own internal energy source (battery). When the UPS is
operating from battery power when no AC input is available, there will be
voltage at the output terminals.
Make sure that the AC Utility power source is correctly grounded.
1.1.6 Do not open the case, as there are no serviceable parts inside. Your
Warranty will be void.
Do not try to repair the unit yourself; contact your local supplier or your
warranty will be void.
Make sure that the rated input voltage of the UPS matches the available AC
mains voltage.
1.1.9 Use a certified input power cable with the correct plugs and sockets
for the appropriate voltage system.
To eliminate any overheating of the UPS, keep all ventilation openings free
from obstruction, and do not store anything on top of the UPS. Keep the
UPS 12 inches away from the wall.
Make sure the UPS is installed within the proper environment as specified.
(0-40°C and 30-90% non-condensing humidity)
Do not install the UPS in direct sunlight. Your warranty may be void if the
batteries fail.
2