ak4645 ETC-unknow, ak4645 Datasheet - Page 29

• Manufacturer Part Number: ak4645
• Description: Stereo Codec With Mic/hp-amp
• Manufacturer: ETC-unknow

ASAHI KASEI
b) PLL reference clock: BICK or LRCK pin
Sampling frequency corresponds to 7.35kHz to 48kHz by changing FS3-0 bits (see Table 7).
The external clocks (MCKI, BICK and LRCK) should always be present whenever the ADC or DAC is in operation
(PMADL bit = “1”, PMADR bit = “1” or PMDAC bit = “1”). If these clocks are not provided, the AK4645 may draw
excess current and it is not possible to operate properly because utilizes dynamic refreshed logic internally. If the external
clocks are not present, the ADC and DAC should be in the power-down mode (PMADL=PMADR=PMDAC bits = “0”).
MS0543-E-00
Figure 22. PLL Slave Mode 2 (PLL Reference Clock: LRCK pin)
Figure 21. PLL Slave Mode 2 (PLL Reference Clock: BICK pin)
AK4645
AK4645
MCKO
MCKI
BICK
LRCK
SDTO
SDTI
MCKO
MCKI
BICK
LRCK
SDTO
SDTI
32fs or 64fs
- 29 -
≥ 32fs
1fs
1fs
BCLK
LRCK
SDTI
SDTO
BCLK
LRCK
SDTI
SDTO
DSP or µP
DSP or µP
[AK4645]
2006/09