ak7714 AKM Semiconductor, Inc., ak7714 Datasheet - Page 24

• Manufacturer Part Number: ak7714
• Description: 20-bit Audio Codec With Dsp And Delay Ram
• Manufacturer: AKM Semiconductor, Inc.

[ASAHI KASEI]
(2) Power supply startup sequence
Turn on the power by setting to INIT RESET = "L",DSP RESET = "L" and CODEC RESET = "L".
Then the AK7714 is initialized by setting to INIT RESET = "H". Note 1)
Initialization by INIT RESET is sufficient if it is done only when the power is turned on.
Note1: Set to INIT RESET = "H" after setting the oscillation when a crystal oscillator is used.
M0018-E-00
AVDD, AVB, DVB
DVDD
INIT RESET
DSP RESET
CODEC RESET
2: Do not stop the system clock (slave mode: XTI, LRCLK, BITCLK, master mode: XTI) except when
This setting time may differ depending on the crystal oscillator and its external circuit.
INIT RESET = "L".
If these clock signals are not supplied, too much current will flow because the dynamic logic is used internally,
and an operation failure may result.
Power OFF
Fig. Power supply startup sequence
When a crystal oscillator is used,
ensure stable oscillation in this
period.
- 24 -
DSP RESET and CODEC RESET can be controlled
simultaneously during normal use.
[AK7714]
‘98/07