s5u1c17001c Epson Electronics America, Inc., s5u1c17001c Datasheet - Page 520

• Manufacturer Part Number: s5u1c17001c
• Description: Cmos 16-bit Application Specific Controller
• Manufacturer: Epson Electronics America, Inc.

10 DEBUGGER
■ Example 2 (ICD Mini mode)
10-128
Notes
(gdb) c17 clockmd 1
(gdb) c17 rst
CPU resetting .................... done
(gdb) continue
Breakpoint 1, sub (k=0) at main.c:20
(gdb) c17 clock
(gdb) continue
Continuing.
Breakpoint 1, sub (k=1) at main.c:20
(gdb) c17 clock
In this example, after setting in reset mode, the execution counter is reset by the reset command, thereby
starting the program. In reset mode, the execution counter is reset when program execution resumes after a
break. Therefore, counts in this mode differ from those in cumulating mode.
• In ICD Mini mode, the continue/until command must be executed before this command becomes
• The c17 clock command cannot display execution times while the lapse of time break (c17 timebrk)
• The execution counter is reset in the following cases:
effective.
In simulator mode, this command is always effective.
is enabled. Disable the lapse of time break (c17 timebrk 0) to measure execution times.
1. When the c17 clockmd command changes execution counter mode (from cumulating mode to reset
2. When the program is started with the counter set to reset mode
3. When the CPU is reset
4. When the c17 timebrk, step, stepi, next, nexti or finish command is executed in ICD
mode or vice versa)
Mini mode
0 hour 0 min 1 sec 23 ms 1.33 us
0 hour 1 min 53 sec 0 ms 0 us
EPSON
(C COMPILER PACKAGE FOR S1C17 FAMILY) (Ver. 1.1)
S5U1C17001C MANUAL