s5u1c17001c Epson Electronics America, Inc., s5u1c17001c Datasheet - Page 567

• Manufacturer Part Number: s5u1c17001c
• Description: Cmos 16-bit Application Specific Controller
• Manufacturer: Epson Electronics America, Inc.

11.6 moto2ff.exe
11.6.1 Function
The moto2ff loads a Motorola S3 format file and fills the unused area in data of the file with 0xff to generate an
output file. The start address and block size can be specified to output the required area only.
In an application development for the S1C17 Family, the moto2ff is used to retrieve ROM area data from the HEX
file generated by the objcopy. The ROM area data generated by moto2ff should be processed with sconv32 and
winmdc to generate the mask data to be submitted to Seiko Epson. For the mask data generation procedure, refer to
Section 3.3.7, "Creating ROM Data".
11.6.2 Input/Output Files
Input file
Output file
11.6.3 Startup Format
moto2ff <data start address> <data block size> <input file name>
<data start address>: Specify the data output start address in the input file using a hexadecimal number.
<data block size>:
<input file name>:
• Usage will be displayed when no parameters are specified.
• If the output file already exists, it will be overwritten.
• When an error occurs, an error message is displayed and the output file is not generated.
• If the input Motorola S3 file contains data that exceeds the range specified by a start address and a block size, a
• If Motorola S3 data records are in the same address, the first data is overwritten by the last.
• Make sure that the data start address and data block size are correct values for the model by referring its technical
• When moto2ff has completed successfully, the following message is shown in the standard output.
S5U1C17001C MANUAL
(C COMPILER PACKAGE FOR S1C17 FAMILY) (Ver. 1.1)
HEX file
ROM area data file
warning message appears and the moto2ff generates the file with the data only within the specified area.
manual. If an incorrect value is input, an error will occur in the winmdc process to generate final mask data.
Convert Completed
File format: Motorola S3 format file
File name:
Description: A Motorola S3 format HEX file converted from an elf format executable file by the objcopy.
File format: Motorola S3 format file
File name:
Description: A data file of the specified ROM area in which the unused area is filled with 0xff.
<file name>.sa
<file name>.saf
Specify the output data block size in bytes using a hexadecimal number.
Specify the file name of the Motorola S3 format file to be filled with 0xff.
The file name must be within 128 characters including a path and an extension. Path can be
specified for the input file, note, however, that the output file will be located in the current
directory.
EPSON
11 OTHER TOOLS
11-25