hfbr-0300z Avago Technologies, hfbr-0300z Datasheet - Page 3

• Manufacturer Part Number: hfbr-0300z
• Description: 1300 Nm Fiber Optic Transmitter And Receiver
• Manufacturer: Avago Technologies

Panel Mounting Hardware
The HFBR-4411Z kit consists of 100 nuts and 100 wash-
ers with dimensions as shown in Figure 1. These kits are
available from Avago or any authorized distributor. Any
standard size nut and washer will work, provided the total
thickness of the wall, nut, and washer does not exceed
0.2 inch (5.1 mm).
When preparing the chassis wall for panel mounting, use
the mounting template in Figure 2. When tightening the
nut, torque should not exceed 0.8 N-m (8.0 in-lb).
Figure 1. HFBR-4411Z mechanical dimensions
HFBR-1312TZ Transmitter Absolute Maximum Ratings
3
(0.375)
9.53
CAUTION: The small junction sizes inherent to the design of this bipolar component increase the component’s susceptibility to dam-
age from electrostatic discharge (ESD). It is advised that normal static precautions be taken in handling and assembly of this com-
ponent to prevent damage and/or degradation which may be induced by ESD.
Parameter
Storage Temperature
Operating Temperature
Lead Soldering Cycle
Temperature
Lead Soldering Cycle Time
Forward Input Current DC
Reverse Input Voltage
DIA.
ALL DIMENSIONS IN MILLIMETERS AND (INCHES).
INTERNAL TOOTH LOCK WASHER
(0.410)
10.41
HEX-NUT
3/8 - 32 UNEF -
2B THREAD
MAX.
12.70
(0.50)
DIA.
DIA.
Symbol
(0.563)
(0.065)
I
14.27
V
T
T
FDC
1.65
A
S
R
TYP.
DIA.
Min.
-55
-40
Figure 2. Recommended cut-out for panel mounting
Recommended Chemicals for Cleaning/Degreasing
HFBR-0300Z Products
Alcohols (methyl, isopropyl, isobutyl)
Aliphatics (hexane, heptane)
Other (soap solution, naphtha)
Do not use partially halogenated hydrocarbons (such as
1.1.1 trichloroethane), ketones (such as MEK), acetone,
chloroform, ethyl acetate, methylene dichloride, phe-
nol, methylene chloride, or N-methylpyrolldone. Also,
Avago does not recommend the use of cleaners that use
halogenated hydrocarbons because of their potential
environmental harm.
Max.
260
100
85
85
10
1
Unit
mA
sec
°C
°C
°C
V
(0.386)
(0.315)
9.80
DIA.
8.0
Reference
Note 8