hb28d032bp2 Renesas Electronics Corporation., hb28d032bp2 Datasheet - Page 86

no-image

hb28d032bp2

Manufacturer Part Number
hb28d032bp2
Description
Mobile Embedded Flash With Multimediacard-tm Interface 16 Mbyte/32 Mbyte
Manufacturer
Renesas Electronics Corporation.
Datasheet
HB28E016/D032BP2
Abbreviations and Terms
Abbreviations
<n>
CMD<n>
PP
OD
CSD
CID
RCA
OCR
DSR
PDS
Command
Response
Broadcast Com.
Addressed Com.
Point to point C.
DAT
CLK
CMD
V
V
Memory core
MultiMediaCard
interface
MID
86
SS1
CC
,
2
Terms
Argument of a command or data field.
MultiMediaCard bus command <n>. See Command.
Push Pull, output driver type with low impedance driver capability for 0 and 1.
Open Drain, output driver type with low impedance driver capability for 0 and high
impedance driver capability for 1.
Card specific data, MultiMediaCard register to store operating parameters.
Card identification data, MultiMediaCard register for the card initialization procedure.
Relative card address, MultiMediaCard register which contains the current card
address of an initialized Hitachi Mobile Embedded Flash.
Operation condition register, MultiMediaCard register that contains the voltage window
which is supported by these Hitachi Mobile Embedded Flashes.
Driver stage register, control register for the programmable driver stage driver (PDS).
Programmable driver stage driver, is a tri-state output driver which has is
programmable to adapt the driver capabilities to the bus design.
A command send from the MultiMediaCard host to one or more Hitachi Mobile
Embedded Flashes
A response is always sent from the card to the host. It is always initiated by a
command (Remark: not all commands enforce responses).
A command may send as broadcast or as an addressed command. A broadcast
command is sent to all cards connected to the MultiMediaCard bus simultaneous.
An addressed command is sent to exactly one selected Hitachi Mobile Embedded
Flash. Normally an addressed command forces a response of the card.
Same as addressed command
The data (input)/output signal of these Hitachi Mobile Embedded Flashes.
The clk input signal of these Hitachi Mobile Embedded Flashes.
The command/response input/output of these Hitachi Mobile Embedded Flashes.
Ground contacts/lines of these Hitachi Mobile Embedded Flashes.
Supply voltage contact/line of these Hitachi Mobile Embedded Flashes.
Array of memory cells in the core of these MultiMediaCard.
Hitachi Mobile Embedded Flash’s command interpreter module.
Manufacturer Identifier.

Related parts for hb28d032bp2