smc256af Numonyx, smc256af Datasheet - Page 45

• Manufacturer Part Number: smc256af
• Description: 32 Mbyte, 64 Mbyte, 128 Mbyte, 256 Mbyte And 512 Mbyte 3.3 V / 5 V Supply Compactflash? Card
• Manufacturer: Numonyx

SMCxxxAF
8.2.4
8.2.5
8.2.6
8.2.7
8.2.8
8.3
8.4
8.5
Bit 4 (IDNF)
This bit is set if the requested sector ID is in error or cannot be found.
Bit 3
This bit is ‘0’.
Bit 2 (abort)
This bit is set if the command has been aborted because of a card status condition (Not
Ready, Write Fault, etc.) or when an invalid command has been issued.
Bit 1
This bit is ‘0’.
Bit 0 (AMNF)
This bit is set when there is a general error.
Table 41.
Feature register (address 1F1h [171h]; offset 1, 0Dh write
only)
This write-only register provides information on features that the host can utilize. It is
accessed on data bits D15 to D8 during a write operation to offset 0 with –CE2 Low and –
CE1 High.
Sector Count register (address 1F2h [172h]; offset 2)
This register contains the number of sectors of data to be transferred on a read or write
operation between the host and card. If the value in this register is zero, a count of 256
sectors is specified. If the command was successful, this register is zero at completion. If
not successfully completed, the register contains the number of sectors that need to be
transferred in order to complete the request. The default value is 01h.
Sector Number (LBA 7-0) register (address 1F3h [173h];
offset 3)
This register contains the starting sector number or bits 7 to 0 of the logical block address
(LBA), for any data access for the subsequent sector transfer command.
BBK
D7
Error register
UNC
D6
D5
0
IDNF
D4
D3
0
ABRT
D2
D1
CF-ATA registers
0
AMNF
D0
45/82