BAT-12120 GAMEWELL-FCI [Gamewell-FCI by Honeywell], BAT-12120 Datasheet

BAT-12120

Manufacturer Part Number

BAT-12120

Description

NAC Expander/Power Supply

Manufacturer

GAMEWELL-FCI [Gamewell-FCI by Honeywell]

Datasheet

1.BAT-12120.pdf (2 pages)

Current page: 1 of 2
Download datasheet (76Kb)

Description

The FireForce 8 (FF8) from Gamewell-FCI is a Notification

Appliance Circuit (NAC) extender panel designed to extend

the power capabilities of existing NACs and provide power

(1.5 A) for other ancillary devices. The FF8 will connect to

any brand of a UL-Listed Fire Alarm Control Panel (FACP)

to provide Notification Appliance Circuit expansion.

Designed with advanced switch-mode power-supply tech-

nology, the FireForce 8 provides filtered and electronically-

regulated power distributed to four (4) NACs. Each NAC is

rated at 3.0 Amp. maximum, with a total output capacity of

8.0 Amp. The outputs may be configured as the following:

•

The FF8 includes an internal battery charger.

Gamewell-FCI’s FF8 provides independent output circuit

supervision. In the event of a NAC fault, the FF8 can be

configured to notify the FACP. The FF8 has field-select-

able, built-in strobe and horn sync protocols. Protocols

support Faraday, Gentex, System Sensor, Amseco, and

Cooper-Wheelock devices; or pass through a pre-gener-

ated sync protocol from a single synchronization source.

This eliminates the need for additional individual sync mod-

ules. Independent horn silencing via sync protocol allows

synchronized horns and strobes to operate on a single cir-

cuit.

One of the most challenging aspects of a retrofit application

is locating the existing EOL resistor. In retrofit applications

that have EOL values other than the 3.9K ohm EOL resis-

tor normally used with the FF8, a single resistor matching

the existing EOL can be used as a reference EOL for all

outputs. This feature speeds installation and system check-

out. The reference resistor must be within a range of 2K

ohm to 25K ohm.

“FireForce 8” labeling is placed on the cabinet front, mak-

ing the FF8 ideal for all retrofit applications.

For enhanced notification appliance circuit survivability, the

FF8 can utilize its dual-activation inputs for redundant trip

operation.

Four (4), Class B (Style W, X, Y)

Two (2), Class A (Style Z)

Two (2), Class B and one Class A

Four (4), Class A (Style Z) with the optional Class A

adaptor installed

Specifications are for information only, are not intended for installation purposes, and are subject to change without notice. No responsibility is assumed by Gamewell-FCI for their use.

12 Clintonville Road, Northford, CT 06472-1610 USA • Tel: (203) 484-7161 • Fax: (203) 484-7118

www.gamewell-fci.com

GAMEWELL-FCI

Features

•

Provides two fully-supervised input/control circuits

Redundant activation option for survivability

Multiple sync protocols, compatible with the following

appliances: Cooper-Wheelock, Faraday, System Sen-

sor, Amseco, and Gentex-as field-selectable options

Four (4) configurable supervised NAC outputs

8.0 Amp., 24 VDC, fully regulated full-load output

(power-limited)

Output fault notification to FACP

1.5 A auxiliary power output

Eight trouble and status LEDs

Common trouble Form-C relay

Isolated AC Fail Form-C relay, immediate or delayed

six hours

Ground fault detection

26 AH battery charger capability

Selectable temporal coding

Facilitates multiple NAC synchronization for large

areas

Optional multipack for up to four FF8s in a single lock-

able enclosure

Optional Class A adaptor

NAC Expander/Power Supply

An ISO 9000-2000 Company

SIGNALING

S521

206-01-E

MEA

Approve

FireForce 8

7300-1288:162

CS-2282 Rev. a page 1 of 2

Related parts for BAT-12120

BAT-12120 Summary of contents

Page 1

... Two (2), Class B and one Class A • Four (4), Class A (Style Z) with the optional Class A adaptor installed The FF8 includes an internal battery charger. Gamewell-FCI’s FF8 provides independent output circuit supervision. In the event of a NAC fault, the FF8 can be configured to notify the FACP. The FF8 has field-select- able, built-in strobe and horn sync protocols ...

Page 2

... Steady Sync Ordering Information Model FF8 FF8-MP FF8-CM 31076 31081 31085 BAT-1270 BAT-12120 GAMEWELL-FCI www.gamewell-fci.com 10 - 93%, non-condensing FF8 Cabinet: 18.0" 12.5" 4.5" D (45. 31. 11.43 D cm) FF8-MP Cabinet: 37.2" 24.0" 6.0" D (94. 60. 15.24 D cm) OUTPUT (Follows Input) Temporal ...

Related keywords

BAT-12120 datasheet
BAT-12120 data sheet
BAT-12120 pdf datasheet
BAT-12120 component
BAT-12120 part
BAT-12120 distributor
BAT-12120 RoHS
BAT-12120 datasheet download