BAT-1270 GAMEWELL-FCI [Gamewell-FCI by Honeywell], BAT-1270 Datasheet

no-image

BAT-1270

Manufacturer Part Number
BAT-1270
Description
Constant-Duty Power Supply
Manufacturer
GAMEWELL-FCI [Gamewell-FCI by Honeywell]
Datasheet
Description
The Gamewell-FCI CDP8 Constant-Duty Power Supply is
a regulated, power-limited, 24 VDC, 8.0 amp. power supply
which can be used anywhere a constant 24 VDC source is
required. The CDP8 is suited and UL-Listed for fire alarm,
access control, and general power supply applications.
The Gamewell-FCI CDP8 provides four (4) power-limited,
24 VDC, 3.0 amp. outputs. Each output can be individually
configured to shed its load (turn off) during a power failure
to extend available standby battery power for designated
critical circuits.
Each output circuit is monitored for overload or shorted
conditions, with the trouble condition indicated by a specific
circuit trouble LED and activation of the common trouble
relay. Overloaded circuits will automatically restore when
the overload is removed.
Engineer’s Specifications
The power supply shall provide four (4) output circuits
capable of up to 3.0 amp. continuous 24 VDC each to a
maximum of 8.0 amps. total. The output voltage shall be
regulated and power-limited. Each output circuit shall be
configurable to shed its load with the loss of the primary AC
source. The Constant-Duty Power Supply shall include an
internal battery charger with charging capacity of 26 AH. It
shall also be operational from an externally charged bat-
tery. Operational troubles shall be indicated by seven LEDs
and a common trouble Form-C relay. The supply shall also
have a delayed AC Fail relay. The Constant-Duty Power
Supply shall be Gamewell-FCI, model CDP8.
Specifications
Primary Input Power: 120 VAC, 50/60 Hz, 3.5 A
Secondary Power:
Battery Charging
Capacity:
Total Output Power:
Standby Current:
Output Ratings:
Cabinet Dimensions: 18.0" H x 12.5" W x 4.5" D
©2007 by Honeywell International Inc. All rights reserved.
Specifications are for information only, are not intended for installation purposes, and are subject to change without notice. No responsibility is assumed by Gamewell-FCI for their use.
12 Clintonville Road, Northford, CT 06472-1610 USA • Tel: (203) 484-7161 • Fax: (203) 484-7118
or 220 V, 1.9 A, jumper-selectable.
24-volt: two 7 – 26 AH batteries
Up to 26 AH batteries
8.0 A maximum
0.03 A
24 VDC fully regulated, 3.0 A max-
imum per circuit, 8.0 A total
(45.72 H x 31.75 W x 11.43 D cm)
www.gamewell-fci.com
GAMEWELL-FCI
Features
Four (4) configurable monitored outputs
8.0 A, 24 VDC, fully regulated full-load output
(power-limited)
Seven (7) trouble and status LEDs
Common trouble Form-C relay
Isolated AC Fail Form-C relay
Selectable AC Fail notification relay
Ground fault detection
26.0 A battery-charger capability
Selectable internal battery charger disable
Selectable internal ground fault detection disable
Selectable load shedding on AC Fail per output
Constant-Duty Power Supply
An ISO 9000-2000 Company
SIGNALING
S8240 7315-1288:163
CDP8
CS-2283 Rev. a page 1 of 2
CDP8

Related parts for BAT-1270

BAT-1270 Summary of contents

Page 1

... Each output circuit shall be configurable to shed its load with the loss of the primary AC source. The Constant-Duty Power Supply shall include an internal battery charger with charging capacity of 26 AH. It shall also be operational from an externally charged bat- tery. Operational troubles shall be indicated by seven LEDs and a common trouble Form-C relay ...

Page 2

... AC Fail Relay: 2A/30 VDC or 120 VAC 12 Clintonville Road, Northford, CT 06472-1610 USA • Tel: (203) 484-7161 • Fax: (203) 484-7118 CS-2283 Rev. a page Ordering Information Part Number Description CDP8 BAT-1270 BAT-12120 30069 GAMEWELL-FCI www.gamewell-fci.com 24 VDC, 8.0 amp. power supply with inte- gral battery charger ...

Related keywords