mu9c4320l-90tdi Music Semiconductors, Inc., mu9c4320l-90tdi Datasheet - Page 20

• Manufacturer Part Number: mu9c4320l-90tdi
• Description: Mu9c4320l Atmcam
• Manufacturer: Music Semiconductors, Inc.

CONTROL STATE DESCRIPTIONS
Read/Write Memory
Control State:
Mnemonic:
Binary Op Code: aaa
/W: LOW
Description: Writes data from the DQ31–0 bus to the
location defined by the address value present on the
AC11–0 bus. The write optionally can be masked by the
mask register selected through the Configuration register;
when masking is selected, only bits in the addressed
location that correspond to LOW values in the selected
mask register are updated. The validity of the location is
set by the state of the /VB input, /VB = LOW: Valid, /VB
= HIGH: Empty. This control state provides direct random
access memory writes. This control state, along with the
Read cycle equivalent is the only one that uses direct
addressing. It is selected by the /AV line being LOW. All
other control states have the /AV line HIGH whereby the
AC11–0 bus carries a control code. This control state is
not available in software mode.
Control State:
Mnemonic:
Binary Op Code: aaa
/W: HIGH
Description: Reads data from the location defined by the
address value present on the AC11–0 bus to the DQ31–0
bus. This control state provides direct random access
memory reads. This control state, along with the Write
cycle equivalent is the only one that uses direct
addressing. It is selected by the /AV line being LOW. All
other control states have the /AV line HIGH whereby the
AC11–0 bus carries a control code. During the Read cycle,
the /VB line carries the Validity Bit value of the addressed
location. This control state is not available in software
mode.
Control State:
Mnemonic:
Binary Op Code: XXX nnn 000 000
/W: LOW
Description: Writes data from the DQ31–0 bus to the
location defined by the contents of the Address register.
The validity of the location is set by the state of the /VB
input, /VB = LOW: Valid, /VB = HIGH: Empty. The write
is masked by the contents of Mask Register nnn. When
nnn=000 no mask is used; when masking is selected, only
bits in the addressed location that correspond to LOW
values in the selected mask register are updated. This
control state provides indirect random access memory
writes.
MU9C4320L ATMCAM
/AV: LOW
/AV: HIGH
/AV: LOW
WR[aaa]
WR[AR]{MRnnn}
Direct Write at Address
Direct Read at Address
RD[aaa]
Indirect Write at Address
PA:AA: aaa
PA:AA: aaa
PA:AA: aaa
Scope: AS
Scope: S
Scope: AS
20
Control State:
Mnemonic:
Binary Op Code: XXX nnn 000 000
/W: HIGH
Description: Reads data from the location defined by the
contents of the Address register to the DQ31–0 bus. This
control state provides indirect random access memory
reads. During the Read cycle, the /VB line carries the
Validity bit value of the addressed location.
Control State:
Mnemonic:
Binary Op Code: XXX nnn 100 110
/W: LOW
Description: Writes data from the DQ31–0 bus to the
location defined by the contents of the Address register.
The validity of the location is set by the state of the /VB
input, /VB = LOW: Valid, /VB = HIGH: Empty. The write
is masked by the contents of Mask Register nnn. When
nnn=000 no mask is used; when masking is selected, only
bits in the addressed location that correspond to LOW
values in the selected mask register are updated. The
contents of the Address register are incremented.
Control State:
Mnemonic:
Binary Op Code: XXX XXX 100 110
/W: HIGH
Description: Reads data from the location defined by the
contents of the Address register to the DQ31–0 bus. This
control state provides indirect random access memory
reads. During the Read cycle, the /VB line carries the
Validity Bit value of the addressed location. The contents
of the Address register are incremented.
Control State:
Mnemonic:
Binary Op Code: XXX nnn 100 111
/W: LOW
Description: Writes data from the DQ31–0 bus to the
location defined by the contents of the Address register.
The validity of the location is set by the state of the /VB
input, /VB = LOW: Valid, /VB = HIGH: Empty. The write
is masked by the contents of Mask Register nnn. When
nnn=000 no mask is used; when masking is selected, only
bits in the addressed location that correspond to LOW
values in the selected mask register are updated. The
contents of the Address register are decremented.
/AV: HIGH
/AV: HIGH
/AV: HIGH
/AV: HIGH
Indirect Read at Address
RD[AR]
Indirect Write at Address;
Increment Address Register
WR[AR]+{MRnnn}
Indirect Read at Address;
Increment Address Register
RD[AR]+
Indirect Write at Address;
Decrement Address Register
WR[AR]-{MRnnn}
PA:AA: aaa
PA:AA: aaa
PA:AA: aaa
PA:AA: aaa
Control State Descriptions
Scope: AS
Scope: AS
Scope: S
Scope: AS
Rev. 3