PIC12F683-E/MD MICROCHIP [Microchip Technology], PIC12F683-E/MD Datasheet - Page 9

• Manufacturer Part Number: PIC12F683-E/MD
• Description: 8-Pin Flash-Based, 8-Bit CMOS Microcontrollers with nanoWatt Technology
• Manufacturer: MICROCHIP [Microchip Technology]

2.0
2.1
The PIC12F683 has a 13-bit program counter capable
of addressing an 8k x 14 program memory space. Only
the first 2k x 14 (0000h-07FFh) for the PIC12F683 is
physically implemented. Accessing a location above
these boundaries will cause a wraparound within the
first 2K x 14 space. The Reset vector is at 0000h and
the interrupt vector is at 0004h (see Figure 2-1).
FIGURE 2-1:
© 2007 Microchip Technology Inc.
CALL, RETURN
RETFIE, RETLW
MEMORY ORGANIZATION
Program Memory Organization
Wraps to 0000h-07FFh
On-chip Program
Interrupt Vector
Stack Level 1
Stack Level 2
Stack Level 8
Reset Vector
PC<12:0>
Memory
PROGRAM MEMORY MAP
AND STACK FOR THE
PIC12F683
13
0000h
0004h
0005h
07FFh
0800h
1FFFh
2.2
The data memory (see Figure 2-2) is partitioned into two
banks, which contain the General Purpose Registers
(GPR) and the Special Function Registers (SFR). The
Special Function Registers are located in the first 32
locations of each bank. Register locations 20h-7Fh in
Bank 0 and A0h-BFh in Bank 1 are General Purpose
Registers, implemented as static RAM. Register
locations F0h-FFh in Bank 1 point to addresses 70h-7Fh
in Bank 0. All other RAM is unimplemented and returns
‘0’ when read. RP0 of the STATUS register is the bank
select bit.
RP0
0
1
Note:
→
→
Data Memory Organization
The IRP and RP1 bits of the STATUS
register are reserved and should always
be maintained as ‘0’s.
Bank 0 is selected
Bank 1 is selected
PIC12F683
DS41211D-page 7