MPC8533E_10 FREESCALE [Freescale Semiconductor, Inc], MPC8533E_10 Datasheet - Page 109

• Manufacturer Part Number: MPC8533E_10
• Description: Integrated Processor Hardware Specifications
• Manufacturer: FREESCALE [Freescale Semiconductor, Inc]

Option 2
21.12 Guideline for LBIU Termination
If the LBIU parity pins are not used, the following list shows the termination recommendation:
22 Device Nomenclature
Ordering information for the parts fully covered by this hardware specifications document is provided in
Section 22.3, “Part Marking.”
order information.
22.1
The MPC8533E device has been tested to meet the commercial tier qualification.
description for commercial and industrial qualifications.
Note:
1. Refer to
Freescale Semiconductor
Commercial
Industrial
Tier
•
•
•
•
•
1
If PCI arbiter is disabled during POR,
All AD pins will be in the input state. Therefore, all ADs pins need to be grouped together and tied
to OV
All PCI control pins can be grouped together and tied to OV
For LDP[0:3]: tie them to ground or the power supply rail via a 4.7-kΩ resistor.
For LPBSE: tie it to the power supply rail via a 4.7-kΩ resistor (pull-up resistor).
Table 2
Industrial and Commercial Tier Qualification
Typical Application
DD
for operating temperature ranges. Temperature is independent of tier and varies per product.
MPC8533E PowerQUICC III Integrated Processor Hardware Specifications, Rev. 4
Use Time
through a single (or multiple) 10-kΩ resistor(s).
10 years
5 years
Table 69. Commercial and Industrial Description
Contact your local Freescale sales office or regional marketing team for
Part-time/ Full-Time PC's, consumer electronics, office automation, SOHO networking,
Typically Full-Time
Power-On Hours
portable telecom products, PDAs, etc.
Installed telecom equipment, work stations, servers, warehouse
equipment, etc.
Example of Typical Applications
DD
through a single 10-kΩ resistor.
Table 69
Device Nomenclature
provides a
109