STTS752E STMICROELECTRONICS [STMicroelectronics], STTS752E Datasheet - Page 23

• Manufacturer Part Number: STTS752E
• Description: Digital temperature sensor and thermal watchdog
• Manufacturer: STMICROELECTRONICS [STMicroelectronics]

3.5
Note:
READ mode
In this mode the master reads the STTS75 slave after setting the slave address (see
Figure
word address 'An' is written to the on-chip address pointer.
There are two READ modes:
●
●
The Temperature register pointer is usually the default pointer.
These modes are shown in the READ mode typical timing diagrams (see
Figure
Figure 8.
Preset pointer locations (e.g. Temperature, T
Pointer setting (the pointer has to be set for the register that is to be read).
8). Following the WRITE mode Control Bit (R/W=0) and the Acknowledge Bit, the
10, and
Slave address location
Figure 11 on page
START
24).
1
0
SLAVE ADDRESS
0
1 A2 A1 A0
OS
and T
R/W
HYS
A
registers), and
AI12226
Figure
9,
23/38