PIC24FJ32GB002-E/ML MICROCHIP [Microchip Technology], PIC24FJ32GB002-E/ML Datasheet - Page 215

• Manufacturer Part Number: PIC24FJ32GB002-E/ML
• Description: 28/44-Pin, 16-Bit, Flash Microcontrollers with USB On-The-Go (OTG) and nanoWatt XLP Technology
• Manufacturer: MICROCHIP [Microchip Technology]

REGISTER 18-5:
 2010 Microchip Technology Inc.
bit 15
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 15-8
bit 7
bit 6-5
bit 4
bit 3-2
bit 1
bit 0
Note 1:
R/W-0, HS
UACTPND
U-0
—
Do not clear this bit unless the HOSTEN, USBEN and OTGEN bits (U1CON<3,0> and U1OTGCON<2>)
are all cleared.
Unimplemented: Read as ‘0’
UACTPND: USB Activity Pending bit
1 = Module should not be suspended at the moment (requires USLPGRD bit to be set)
0 = Module may be suspended or powered down
Unimplemented: Read as ‘0’
USLPGRD: Sleep/Suspend Guard bit
1 = Indicate to the USB module that it is about to be suspended or powered down
0 = No suspend
Unimplemented: Read as ‘0’
USUSPND: USB Suspend Mode Enable bit
1 = USB OTG module is in Suspend mode; USB clock is gated and the transceiver is placed in a
0 = Normal USB OTG operation
USBPWR: USB Operation Enable bit
1 = USB OTG module is enabled
0 = USB OTG module is disabled
low-power state
U-0
U-0
—
—
U1PWRC: USB POWER CONTROL REGISTER
HS = Hardware Settable bit
W = Writable bit
‘1’ = Bit is set
U-0
U-0
—
—
USLPGRD
R/W-0
(1)
U-0
PIC24FJ64GB004 FAMILY
—
HC = Hardware Clearable bit
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
U-0
U-0
—
—
U-0
U-0
—
—
x = Bit is unknown
USUSPND
R/W-0, HC
U-0
—
DS39940D-page 215
USBPWR
R/W-0
U-0
—
bit 8
bit 0