MC9S12DJ256 MOTOROLA [Motorola, Inc], MC9S12DJ256 Datasheet - Page 69

• Manufacturer Part Number: MC9S12DJ256
• Description: MC9S12DT256 Device User Guide V03.03
• Manufacturer: MOTOROLA [Motorola, Inc]

2.4.3 VDD1, VDD2, VSS1, VSS2 — Core Power Pins
Power is supplied to the MCU through VDD and VSS. Because fast signal transitions place high,
short-duration current demands on the power supply, use bypass capacitors with high-frequency
characteristics and place them as close to the MCU as possible. This 2.5V supply is derived from the
internal voltage regulator. There is no static load on those pins allowed. The internal voltage regulator is
turned off, if VREGEN is tied to ground.
2.4.4 VDDA, VSSA — Power Supply Pins for ATD and VREG
VDDA, VSSA are the power supply and ground input pins for the voltage regulator and the analog to
digital converter. It also provides the reference for the internal voltage regulator. This allows the supply
voltage to the ATD and the reference voltage to be bypassed independently.
2.4.5 VRH, VRL — ATD Reference Voltage Input Pins
VRH and VRL are the reference voltage input pins for the analog to digital converter.
2.4.6 VDDPLL, VSSPLL — Power Supply Pins for PLL
Provides operating voltage and ground for the Oscillator and the Phased-Locked Loop. This allows the
supply voltage to the Oscillator and PLL to be bypassed independently.This 2.5V voltage is generated by
the internal voltage regulator.
NOTE:
NOTE:
Mnemonic
V
V
V
V
V
V
V
V
DD1, 2
V
SS1, 2
V
DDR
SSR
DDX
DDA
SSX
SSA
RH
RL
Table 2-2 MC9S12DP256 Power and Ground Connection Summary
No load allowed except for bypass capacitors.
No load allowed except for bypass capacitors.
112-pin QFP
Pin Number
13, 65
14, 66
107
106
41
40
83
86
85
84
Nominal
Voltage
2.5 V
5.0 V
5.0 V
5.0 V
5.0 V
0 V
0 V
0 V
0 V
0V
Internal power and ground generated by internal regulator
External power and ground, supply to pin drivers and internal
External power and ground, supply to pin drivers.
Operating voltage and ground for the analog-to-digital
Reference voltages for the analog-to-digital converter.
voltage regulator.
converters and the reference for the internal voltage regulator,
allows the supply voltage to the A/D to be bypassed
independently.
MC9S12DT256 Device User Guide — V03.03
Description
67