EVAL-AD7321CB AD [Analog Devices], EVAL-AD7321CB Datasheet - Page 27

• Manufacturer Part Number: EVAL-AD7321CB
• Description: 500 kSPS, 2-Channel, Software-Selectable, True Bipolar Input, 12-Bit Plus Sign ADC
• Manufacturer: AD [Analog Devices]

REFERENCE
The AD7321 can operate with either the internal 2.5 V on-chip
reference or an externally applied reference. The internal
reference is selected by setting the Ref bit in the control register
to 1. On power-up, the Ref bit is 0, which selects the external
reference for the AD7321 conversion. Suitable reference sources
for the AD7321 include AD780, AD1582, ADR431, REF193,
and ADR391.
The internal reference circuitry consists of a 2.5 V band gap
reference and a reference buffer. When operating the AD7321
in internal reference mode, the 2.5 V internal reference is available
at the REFIN/OUT pin, which should be decoupled to AGND
using a 680 nF capacitor. It is recommended that the internal
reference be buffered before applying it elsewhere in the system.
The internal reference is capable of sourcing up to 90 μA.
On power-up, if the internal reference operation is required for
the ADC conversion, a write to the control register is necessary
to set the Ref bit to 1. During the control register write, the
Rev. 0 | Page 27 of 36
conversion result from the first initial conversion is invalid. The
reference buffer requires 500 μs to power up and charge the
680 nF decoupling capacitor during the power-up time.
The AD7321 is specified for a 2.5 V to 3 V reference range.
When a 3 V reference is selected, the ranges are ±12 V, ±6 V,
±3 V, and 0 V to +12 V. For these ranges, the V
must be equal to or greater than the maximum analog input
range selected (see Table 6).
V
The AD7321 has a V
the serial interface operates. V
interface to both 3 V and 5 V processors. For example, if the
AD7321 is operated with a V
powered from a 3 V supply. This allows the AD7321 to accept
large bipolar input signals with low voltage digital processing.
DRIVE
DRIVE
feature to control the voltage at which
CC
DRIVE
of 5 V, the V
allows the ADC to easily
DRIVE
DD
pin can be
and V
AD7321
SS
supply