MSP3410G Micronas, MSP3410G Datasheet - Page 101

• Manufacturer Part Number: MSP3410G
• Description: Multistandard Sound Processor Family
• Manufacturer: Micronas

DATA SHEET
6.7. Demodulator Source Channels in Manual Mode
6.7.1. Terrestric Sound Standards
Table 6–17 shows the source channel assignment of
the demodulated signals in case of manual mode for
all terrestric sound standards. See Table 2–2 for the
assignment in the Automatic Sound Select mode. In
manual mode for terrestric sound standards, only two
demodulator sources are defined.
6.7.2. SAT Sound Standards
Table 6–18 shows the source channel assignment of
the demodulated signals for SAT sound standards.
Micronas
May 27, 2003; 6251-476-1DS
6.8. Exclusions of Audio Baseband Features
In general, all functions can be switched independently.
Two exceptions exist:
1. NICAM cannot be processed simultaneously with
2. FM adaptive deemphasis cannot be processed
6.9. Compatibility Restrictions to MSP 34x0D
The MSP 34x0G is fully hardware compatible to the
MSP 34x0D. However, to substitute a MSP 34x0D by
the corresponding MSP 34x0G, the controller software
has to be adapted slightly:
1. The register FM-Matrix (00 0E
2. With the MSP 34x0G, the STANDARD SELECTION
the FM2 channel.
simultaneously with FM-identification.
changed from “no matrix (00
(03
standards (see also Table 6–17).
initializes the FM-deemphasis, which is not the case
for the MSP 34x0D. So, if STANDARD SELECTION
is applied, this I
hex
)” during mono transmission of all TV-sound
2
C instruction can be omitted.
hex
MSP 34x0G
hex
)” to “sound A mono
low part) must be
101