HY5DU561622DLTP HYNIX [Hynix Semiconductor], HY5DU561622DLTP Datasheet - Page 35

• Manufacturer Part Number: HY5DU561622DLTP
• Description: 256M DDR SDRAM (268,435,456-bit CMOS Double Data Rate(DDR) Synchronous DRAM)
• Manufacturer: HYNIX [Hynix Semiconductor]

14. DQS, DM and DQ input slew rate is specified to prevent double clocking of data and preserve setup and hold times. Signal
15. tDAL = (tDPL / tCK ) + (tRP / tCK ). For each of the terms above, if not already an integer, round to the next highest integer.
16. For the parts which do not has internal RAS lockout circuit, Active to Read with Auto precharge delay should be
17. tHZ and tLZ transitions occur in the same access time windows as valid data trasitions. These parameters are not referenced
Rev. 0.1 /May 2004
transitions through the DC region must be monotonic.
tCK is equal to the actual system clock cycle time.
Example: For DDR266B at CL=2.5 and tCK = 7.5 ns,
tDAL = (15 ns / 7.5 ns) + (20 ns / 7.5 ns) = (2.00) + (2.67)
Round up each non-integer to the next highest integer: = (2) + (3), tDAL = 5 clocks
tRAS - (BL/2) x tCK.
to a specific voltage level but specify when the device output is no longer driving (HZ), or begins driving (LZ).
HY5DU56422D(L)TP
HY5DU56822D(L)TP
HY5DU561622D(L)TP
35