ST72C334J4TAE STMicroelectronics, ST72C334J4TAE Datasheet - Page 149

• Manufacturer Part Number: ST72C334J4TAE
• Description: 8-bit MCU for automotive with single voltage Flash/ROM memory, ADC, 16-bit timers, SPI, SCI interfaces
• Manufacturer: STMicroelectronics

19 SUMMARY OF CHANGES
Description of the changes between the current release of the specification and the previous one.
17-Oct-2007
Date
Revision
1
Initial release of the ST72334xx-Auto,ST72314xx-Auto, ST72124Jx-Auto datasheet
This datasheet was created from the ST72334J/N, ST72314J/N, ST72124J datasheet, revision
2.5 dated April 2003, with the following changes:
Changed document title and description on
Removed PSDIP package outlines from
“Device Summary” on page
- modified to include only automotive devices
- replaced ‘ROM’ with ‘Flash/ROM’ as program memory for ST72124J2-Auto device
- added operating temperature range specific to ROM devices
Section 1 "PREAMBLE: ST72C334-Auto VERSUS ST72E331 SPECIFICATION" on page
Replaced ST72C334 with ST72C334-Auto
Section 2 "INTRODUCTION" on page
Section 3 "PIN DESCRIPTION" on page
Figure 3.44-Pin TQFP Package Pinout (J
Table 1, “Device Pin Description,” on page
Section 8 "SUPPLY, RESET AND CLOCK MANAGEMENT" on page
sion to ST72xxxJ/N numbers in first paragraph
Modified description of external and internal RC in
Section 13.1.3 "Functional Description" on page
ond paragraph to be in line with spec given in
page 132
Section 14.1.4 "Indexed (No Offset, Short, Long)" on page
dressing mode” with “The indexed addressing mode” in second paragraph
Section 15.3.1 "General Operating Conditions" on page
range conditions to include only automotive device suffix versions
Figure 95.SPI Slave Timing Diagram with CPHA = 1
SCK
Section 16.1 "PACKAGE MECHANICAL DATA" on page
- removed
- removed
- added
- removed
Section 16.2 "THERMAL CHARACTERISTICS" on page
associated values from package thermal resistance ratings
Section 17.2.1 "User Option Byte 0" on page
with 64/44-pin package configurations
Figure 101.ROM Factory Coded Device
Figure 102.Flash User Programmable Device
- modified to include only automotive devices
- removed B temperature version
“MICROCONTROLLER OPTION LIST” on page
Section 17.4 "DEVELOPMENT TOOLS" on page
‘www.st.com” at end of first paragraph
Table 27, “STMicroelectronics Tool Features,” on page
- changed programming capability from ‘Yes (all packages)’ to ‘Yes’ for ST7 Programming
Board
- added footnote 2
Section 17.5 "ST7 APPLICATION NOTES" on page
Notes”
Updated disclaimer on last page to include a mention about the use of ST products in automo-
tive applications
INPUT
Section 16.3 "ECOPACK®" on page 142
Figure “56-Pin Plastic Dual In-Line Package, Shrink 600-mil Width”
Figure “42-Pin Plastic Dual In-Line Package, Shrink 600-mil Width”
Section "SOLDERING AND GLUEABILITY INFORMATION"
ST72334xx-Auto, ST72314xx-Auto, ST72124Jx-Auto
1:
8: Added -Auto extension to ST72xxxJ/N numbers
Main changes
Types: Modified to include only automotive devices
page 1
9: Removed
versions): Removed SDIP package pinout
11: Removed SDIP device pin number columns
page 1
143: Replaced 56/42-pin package configurations
Section 15.9.1 "Asynchronous RESET Pin" on
Types:
50: Replaced 500ns with 30µs at end of sec-
145: Removed SDIP devices
146: Replaced ‘http//mcu.st.com’ with
“MULTI-OSCILLATOR (MO)” on page 30
147: Removed
1): Replaced CPHA=0 with CPHA=1 for
Figure "56-Pin SDIP Package Pinout"
146:
111: Modified ambient temperature
142: Removed SDIP packages and
141:
103: Replaced “The indirect ad-
Table “ST7 Application
26: Added -Auto exten-
149/150
7: