SiM3C157-B-GM Silicon Labs, SiM3C157-B-GM Datasheet - Page 47

• Manufacturer Part Number: SiM3C157-B-GM
• Description: ARM Microcontrollers - MCU 128KB LGA92
• Manufacturer: Silicon Labs

Specifications of SiM3C157-B-GM

• Rohs: yes
• Core: ARM Cortex M3
• Processor Series: SIM3C1xx
• Data Bus Width: 32 bit
• Maximum Clock Frequency: 80 MHz
• Program Memory Size: 128 KB
• Data Ram Size: 42 KB
• On-chip Adc: Yes
• Operating Supply Voltage: 1.8 V to 3.6 V
• Operating Temperature Range: - 40 C to + 85 C
• Package / Case: LGA-92
• Mounting Style: SMD/SMT
• Interface Type: 2 x I2C, I2S, 3 x SPI, 2 x USART, 2 x UART
• Number Of Programmable I/os: 75
• Number Of Timers: 12 x 32 bit
• Supply Voltage - Max: 3.6 V

4.8. Reset Sources
Reset circuitry allows the controller to be easily placed in a predefined default condition. On entry to this reset
state, the following occur:
All registers are reset to the predefined values noted in the register descriptions unless the bits only reset with a
power-on reset. The contents of RAM are unaffected during a reset; any previously stored data is preserved as
long as power is not lost.
The Port I/O latches are reset to 1 in open-drain mode. Weak pullups are enabled during and after the reset. For
VDD Supply Monitor and power-on resets, the RESET pin is driven low until the device exits the reset state.
On exit from the reset state, the program counter (PC) is reset, and the system clock defaults to an internal
oscillator. The Watchdog Timer is enabled with the Low Frequency Oscillator (LFO0) as its clock source. Program
execution begins at location 0x00000000.
RESET






The core halts program execution.
Module registers are initialized to their defined reset values unless the bits reset only with a power-on
reset.
External port pins are forced to a known state.
Interrupts and timers are disabled.
Clocks to all AHB peripherals are enabled.
Clocks to all APB peripherals other than Watchdog Timer, EMIF0, and DMAXBAR are disabled.
Watchdog Timer
Software Reset
PMU / Wakeup
Missing Clock
Comparator 0
Comparator 1
VDD Supply
RTC0 Alarm
Core Reset
Detector
Monitor
Reset Sources
Rev.1.0
SiM3C1xx
system reset
47