M95128-DFMC6TG STMicroelectronics, M95128-DFMC6TG Datasheet - Page 27

• Manufacturer Part Number: M95128-DFMC6TG
• Description: EEPROM 128Kbit SPI EE 20 MHz 1.8 to 5.5
• Manufacturer: STMicroelectronics

Specifications of M95128-DFMC6TG

• Rohs: yes

M95128-W M95128-R M95128-DF
6.8
Write Identification Page (available only in M95128-D
devices)
The Identification Page (64 bytes) is an additional page which can be written and (later)
permanently locked in Read-only mode.
Writing this page is achieved with the Write Identification Page instruction (see
Chip Select signal (S) is first driven low. The bits of the instruction byte, address bytes, and
at least one data byte are then shifted in on Serial Data Input (D). Address bit A10 must be
0, upper address bits are Don't Care, the lower address bits [A5:A0] address bits define the
byte address inside the identification page. The instruction sequence is shown in
Figure 16. Write identification page sequence
Doc ID 5798 Rev 16
Table
Instructions
Figure
4). The
27/49
16.