M24LR04E-RMC6T/2 STMicroelectronics, M24LR04E-RMC6T/2 Datasheet - Page 92

• Manufacturer Part Number: M24LR04E-RMC6T/2
• Description: EEPROM 4-Kbit EEProm 400kHz 13.56Mhz 1.8 to 5.5V
• Manufacturer: STMicroelectronics

Specifications of M24LR04E-RMC6T/2

• Rohs: yes

Command codes
26.8
92/142
When configured in the RF busy mode, the RF WIP/BUSY pin is tied to 0 from the SOF that
starts the Reset to ready command to the end of the M24LR04E-R response.
When configured in the RF write in progress mode, the RF WIP/BUSY pin remains in high-Z
state.
Write AFI
On receiving the Write AFI request, the M24LR04E-R programs the 8-bit AFI value to its
memory. The Option_flag is supported.
During the RF write cycle W
otherwise, the M24LR04E-R may not write correctly the AFI value into the memory. The W
time is equal to t
Table 57.
1. Gray means that the field is optional.
Request parameter:
Table 58.
Response parameter:
Table 59.
Response parameter:
Response
Response
Request
SOF
SOF
SOF
Request flags
UID (optional)
AFI
No parameter
Error code as Error_flag is set
–
–
12h: the specified block is locked and its contents cannot be changed
13h: the specified block was not successfully programmed
Request
_flags
8 bits
Write AFI request format
Write AFI response format when Error_flag is NOT set
Write AFI response format when Error_flag is set
Response_
8 bits
Response_flags
flags
1nom
Write
8 bits
AFI
27h
+ 18 × 302 µs.
t
, there should be no modulation (neither 100% nor 10%),
Error code
Doc ID 022208 Rev 5
8 bits
64 bits
UID
(1)
CRC16
16 bits
CRC16
16 bits
8 bits
AFI
CRC16
16 bits
M24LR04E-R
Response
Response
Request
EOF
EOF
EOF
t