1893AFILFT IDT, 1893AFILFT Datasheet - Page 60
![no-image](/images/no-image-200.jpg)
1893AFILFT
Manufacturer Part Number
1893AFILFT
Description
Ethernet ICs 3.3V 10/100 BASE TX INTEGRATED PHYCEIVER
Manufacturer
IDT
Datasheet
1.1893AFLF.pdf
(136 pages)
Specifications of 1893AFILFT
Rohs
yes
Part # Aliases
ICS1893AFILFT
- Current page: 60 of 136
- Download datasheet (963Kb)
8.2.2 Loopback Enable (bit 0.14)
8.2.3 Data Rate Select (bit 0.13)
8.2.4 Auto-Negotiation Enable (bit 0.12)
ICS1893AF, Rev D 10/26/04
This bit controls the Loopback mode for the ICS1893AF. Setting this bit to logic:
•
•
This bit provides a means of controlling the ICS1893AF data rate. Its operation depends on the state of
several other functions, including the HW/SW input pin and the Auto-Negotiation Enable bit (bit 0.12).
When the ICS1893AF is configured for:
•
•
This bit provides a means of controlling the ICS1893AF Auto-Negotiation sublayer. Its operation depends
on the HW/SW input pin.
When the ICS1893AF is configured for:
•
•
Zero disables the Loopback mode.
One enables the Loopback mode by disabling the Twisted-Pair Transmitter, the Twisted-Pair Receiver,
and the collision detection circuitry. (The STA can override the ICS1893AF from disabling the collision
detection circuitry in Loopback mode by writing logic one to bit 0.7.) When the ICS1893AF is in Loopback
mode, the data presented at the MAC/repeater transmit interface is internally looped back to the
MAC/repeater receive interface. The delay from the assertion of Transmit Data Enable (TXEN) to the
assertion of Receive Data valid (RXDV) is less than 512 bit times.
Hardware mode (that is, the HW/SW pin is logic zero), the ICS1893AF isolates this bit 0.13 and uses the
10/100SEL input pin to establish the data rate for the ICS1893AF. In this Hardware mode:
Software mode (that is, the HW/SW pin is logic one), the function of bit 0.13 depends on the
Auto-Negotiation Enable bit 0.12. When the Auto-Negotiation sublayer is:
Hardware mode, (that is, the HW/SW pin is logic zero), the ICS1893AF isolates bit 0.12 and uses the
ANSEL (Auto-Negotiation Select) input pin to determine whether to enable the Auto-Negotiation
sublayer.
Note: In Hardware mode, bit 0.12 is undefined.
Software mode, (that is, the HW/SW pin is logic one), bit 0.12 determines whether to enable the
Auto-Negotiation sublayer. When bit 0.12 is logic:
– Bit 0.13 is undefined.
– The ICS1893AF provides a Data Rate Status bit (in the QuickPoll Detailed Status Register, bit 17.15),
– Enabled, the ICS1893AF isolates bit 0.13 and relies on the results of the auto-negotiation process to
– Disabled, bit 0.13 determines the data rate. In this case, setting bit 0.13 to logic:
– Zero:
– One:
ICS1893AF Data Sheet - Release
which always shows the setting of an active link.
establish the data rate.
• Zero selects 10-Mbps ICS1893AF operations.
• One selects 100-Mbps ICS1893AF operations.
• The ICS1893AF disables the Auto-Negotiation sublayer.
• The ICS1893AF bit 0.13 (the Data Rate bit) and bit 0.8 (the Duplex Mode bit) determine the data
• The ICS1893AF enables the Auto-Negotiation sublayer.
• The ICS1893AF isolates bit 0.13 and bit 0.8.
rate and the duplex mode.
Copyright © 2004, Integrated Circuit Systems, Inc.
All rights reserved.
60
Chapter 8 Management Register Set
October, 2004
Related parts for 1893AFILFT
Image
Part Number
Description
Manufacturer
Datasheet
Request
R
![ICS1893AFI](/images/manufacturer_photos/0/3/324/idt__integrated_device_technology_inc_tmb.jpg)
Part Number:
Description:
PHYCEIVER LOW PWR 3.3V 48-SSOP
Manufacturer:
IDT, Integrated Device Technology Inc
Datasheet:
![ICS1893AF](/images/manufacturer_photos/0/3/324/idt__integrated_device_technology_inc_tmb.jpg)
Part Number:
Description:
PHYCEIVER LOW PWR 3.3V 48-SSOP
Manufacturer:
IDT, Integrated Device Technology Inc
Datasheet:
![1893](/images/no-image3.png)
Part Number:
Description:
#1893 LAMP T-3 1/4 14V 330MA MINIATURE BAYONET BASE
Manufacturer:
EIKO
![1893-10PK](/photos/22/65/226522/4436756_tmb.jpg)
Part Number:
Description:
LAMP, INCANDESCENT, BAYONET, 14V
Manufacturer:
CHICAGO MINIATURE LIGHTING, LLC
Datasheet:
![IDT TEMP SENSOR SAMPLE KIT](/images/manufacturer_photos/0/3/333/integrated_device_technology__idt__tmb.jpg)
Part Number:
Description:
IDT TS3000AND TSE2002 SENSORS SAMPLE PACK OFFER
Manufacturer:
Integrated Device Technology (Idt)
![IDT-00/E](/photos/21/57/215774/4550311_tmb.jpg)
Part Number:
Description:
THERMOCOUPLE DIGITAL PANEL METER
Manufacturer:
NEWPORT ELECTRONICS
![IDT%4841CP](/images/manufacturer_photos/0/3/334/integrated_device_technology__inc__tmb.jpg)
Part Number:
Description:
High-performance CMOS bus interface latches
Manufacturer:
Integrated Device Technology, Inc.
![IDT-3030](/images/no-image3.png)
Part Number:
Description:
Accessories Connectors and Cables
Manufacturer:
ADVANTECH [Advantech Co., Ltd.]
Datasheet:
![IDT-5101](/images/no-image3.png)
Part Number:
Description:
Accessories 5.25 Industrial Disk Tray
Manufacturer:
ADVANTECH [Advantech Co., Ltd.]
Datasheet:
![IDT74FCT162244ATPA](/images/manufacturer_photos/0/3/324/idt__integrated_device_technology_inc_tmb.jpg)
Part Number:
Description:
IDT PART
Manufacturer:
IDT, Integrated Device Technology Inc
Datasheet: