SCC68681E1A44-S NXP Semiconductors, SCC68681E1A44-S Datasheet - Page 14

• Manufacturer Part Number: SCC68681E1A44-S
• Description: UART Interface IC RPLCMNT FOR SCN68681
• Manufacturer: NXP Semiconductors
• Type: Dual asynchronous receiver/transmitter (DUART)r

Specifications of SCC68681E1A44-S

• Product Category: UART Interface IC
• Rohs: yes
• Number Of Channels: 2
• Data Rate: 115.2 Kbps
• Supply Voltage - Max: 5.5 V
• Supply Voltage - Min: 4.5 V
• Supply Current: 10 mA
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Package / Case: PLCC-44
• Mounting Style: SMD/SMT
• Operating Supply Voltage: 5 V
• Factory Pack Quantity: 26
• Part # Aliases: SCC68681E1A44,529

Philips Semiconductors
SRA[4] – Channel A Overrun Error
This bit, when set, indicates that one or more characters in the
received data stream have been lost. It is set upon receipt of a new
character when the FIFO is full and a character is already in the
receive shift register waiting for an empty FIFO position. When this
occurs, the character in the receive shift register (and its break
detect, parity error and framing error status, if any) is lost.
This bit is cleared by a ‘reset error status’ command.
SRA[3] – Channel A Transmitter Empty (TxEMTA)
This bit will be set when the transmitter underruns, i.e., both the
TxEMT and TxRDY bits are set. This bit and TxRDY are set when
the transmitter is first enabled and at any time it is re-enabled after
either (a) reset, or (b) the transmitter has assumed the disabled
state. It is always set after transmission of the last stop bit of a
character if no character is in the THR awaiting transmission.
It is reset when the THR is loaded by the CPU, a pending
transmitter disable is executed, the transmitter is reset, or the
transmitter is disabled while in the underrun condition.
SRA[2] – Channel A Transmitter Ready (TxRDYA)
This bit, when set, indicates that the THR is empty and ready to be
loaded with a character. This bit is cleared when the THR is loaded
2004 Apr 06
Dual asynchronous receiver/transmitter (DUART)
14
by the CPU and is set when the character is transferred to the transmit
shift register. TxRDY is reset when the transmitter is disabled and is
set when the transmitter is first enabled, viz., characters loaded into
the THR while the transmitter is disabled will not be transmitted.
SRA[1] – Channel A FIFO Full (FFULLA)
This bit is set when a character is transferred from the receive shift
register to the receive FIFO and the transfer causes the FIFO to
become full, i.e., all three FIFO positions are occupied. It is reset
when the CPU reads the RHR. If a character is waiting in the
receive shift register because the FIFO is full, FFULL will not be
reset when the CPU reads the RHR.
SRA[0] – Channel A Receiver Ready (RxRDYA)
This bit indicates that a character has been received and is waiting
in the FIFO to be read by the CPU. It is set when the character is
transferred from the receive shift to the FIFO and reset when the
CPU reads the RHR, if after this read there are not more characters
still in the FIFO.
SRB – Channel B Status Register
The bit definitions for this register are identical to the bit definitions
for SRA, except that all status applies to the Channel B receiver and
transmitter and the corresponding inputs and outputs.
SCC68681
Product data