C8051F301-GSR Silicon Labs, C8051F301-GSR Datasheet - Page 19

• Manufacturer Part Number: C8051F301-GSR
• Description: 8-bit Microcontrollers - MCU 8KB 2%osc MCU
• Manufacturer: Silicon Labs

Specifications of C8051F301-GSR

• Rohs: yes
• Core: 8051
• Processor Series: C8051
• Data Bus Width: 8 bit

1.3.
The C8051F300/1/2/3/4/5 devices include on-chip Silicon Labs 2-Wire (C2) debug circuitry that provides
non-intrusive, full-speed, in-circuit debugging of the production part installed in the end application.
Silicon Labs' debugging system supports inspection and modification of memory and registers, break-
points, and single stepping. No additional target RAM, program memory, timers, or communications chan-
nels are required. All the digital and analog peripherals are functional and work correctly while debugging.
All the peripherals (except for the ADC and SMBus) are stalled when the MCU is halted, during single
stepping, or at a breakpoint in order to keep them synchronized.
The C8051F300DK development kit provides all the hardware and software necessary to develop applica-
tion code and perform in-circuit debugging with the C8051F300/1/2/3/4/5 MCUs. The kit includes software
with a developer's studio and debugger, an integrated 8051 assembler, and a C2 debug adapter. It also
has a target application board with the associated MCU installed and large prototyping area, plus the nec-
essary communication cables and wall-mount power supply. The Development Kit requires a computer
with Windows® 98 SE or later. The Silicon Labs IDE interface is a vastly superior developing and debug-
ging configuration, compared to standard MCU emulators that use onboard "ICE Chips" and require the
MCU in the application board to be socketed. Silicon Labs' debug paradigm increases ease of use and
preserves the performance of the precision analog peripherals.
1.4.
C8051F300/1/2/3/4/5 devices include a byte-wide I/O Port that behaves like a typical 8051 Port with a few
enhancements. Each Port pin may be configured as an analog input or a digital I/O pin. Pins selected as
digital I/Os may additionally be configured for push-pull or open-drain output. The “weak pull-ups” that are
fixed on typical 8051 devices may be globally disabled, providing power savings capabilities.
On-Chip Debug Circuitry
Programmable Digital I/O and Crossbar
Figure 1.6. Development/In-System Debug Diagram
WINDOWS 98 SE or Later
C2 (x2), VDD, GND
RS-232
VDD
Development Environment
GND
Silicon Labs Integrated
C8051F300
Rev. 2.9
TARGET PCB
Adapter
Debug
C8051F300/1/2/3/4/5
19