S9S08SG8E2VTJR Freescale Semiconductor, S9S08SG8E2VTJR Datasheet - Page 12

• Manufacturer Part Number: S9S08SG8E2VTJR
• Description: 8-bit Microcontrollers - MCU 9S08 UC W/ 8K 0.25UM SGF
• Manufacturer: Freescale Semiconductor

Specifications of S9S08SG8E2VTJR

• Rohs: yes
• Core: HCS08
• Data Bus Width: 8 bit
• Maximum Clock Frequency: 40 MHz
• Program Memory Size: 8 KB
• Data Ram Size: 512 B
• On-chip Adc: Yes
• Operating Temperature Range: - 40 C to + 85 C
• Package / Case: TSSOP-20
• Mounting Style: SMD/SMT
• A/d Bit Size: 10 bit
• A/d Channels Available: 12
• Interface Type: I2C, SCI, SPI
• Maximum Operating Temperature: + 125 C
• Minimum Operating Temperature: - 40 C
• Number Of Programmable I/os: 16
• Number Of Timers: 3
• Program Memory Type: Flash
• Supply Voltage - Max: 5.5 V
• Supply Voltage - Min: 2.7 V

Revision History
To provide the most up-to-date information, the revision of our documents on the World Wide Web will be
the most current. Your printed copy may be an earlier revision. To verify you have the latest information
available, refer to:
The following revision history table summarizes changes contained in this document.
6
Revision
http://freescale.com/
Number
1
2
3
4
5
6
7
Revision
10/2007
03/2009
04/2009
10/2009
6/2007
5/2008
5/2008
Date
Updated the TPM module, incorporated minor revisions for the T
rate, FPROT and Appendix B packaging information. -SAMPLES DRAFT-
Qualify Draft includes updates to TPM module and the Electricals appendix.
Also, revised the order numbering information.
Updated some electricals and made some minor grammatical/formatting revi-
sions. Corrected the SPI block module version. Removed incorrect ADC temper-
ature sensor value from the Features section. Updated the package information
with a special mask set identifier.
Added the EMC Radiated Emissions data. Removed the Susceptibility Data.
Updated the Corporate addresses on the back cover.
Added the High Temperature Device Specifications and updated the charts.
Updated ADC characteristics for Temp Sensor Slope to be a range of
25 C–150 C , added Control Timing table row 2 to separate standard characteris-
tics from the AEC Grade 0 characteristics, and included the text, “AEC Grade 0”
to the text of footnote 3 for Table B-1 Device Numbering System. Added notes to
the ADC chapter specifying that, for this device, there are only 16 analog input
pins and consequently no APCTL3 register. Updated the Literature Request
information on the back cover.
Revised Table A-6 DC Characteristics, Row 24 Bandgap Voltage Reference for
AEC Grade 0 from 1.21V to 1.22 V. Removed AEC Grade 0 (red diamond) from
the Table A-9 ICS Frequency Specifications, Row 9 Total deviation of trimmed
DCO output frequency over voltage and temperature so that it is not listed for
AEC Grade 0.
MC9S08SG32 Data Sheet, Rev. 8
Description of Changes
Freescale Semiconductor
j
, PTxSE slew