L293B STMicroelectronics, L293B Datasheet - Page 9

• Manufacturer Part Number: L293B
• Description: IC DRIVER PUSH-PULL 4CH 16-DIP
• Manufacturer: STMicroelectronics
• Type: Half Bridger

Specifications of L293B

• Input Type: Non-Inverting
• Number Of Outputs: 4
• Current - Output / Channel: 1A
• Current - Peak Output: 2A
• Voltage - Supply: 4.5 V ~ 36 V
• Operating Temperature: -40°C ~ 150°C
• Mounting Type: Through Hole
• Package / Case: 16-DIP (0.300", 7.62mm)
• Operating Supply Voltage: 4.5 V to 36 V
• Mounting Style: Through Hole
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• On-state Resistance: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 497-1389-5

L293E L293B
MOUNTING INSTRUCTIONS
The R
of the L293B and the L293E can be reduced by soldering the GND pins to a suitable copper
th j-amb
area of the printed circuit board as shown in figure 12 or to an external heatsink (figure 13).
During soldering the pins temperature must not exceed 260°C and the soldering time must not be longer
than 12 seconds.
The external heatsink or printed circuit copper area must be connected to electrical ground.
Figure 12. Example of P.C. Board Copper Area which is Used as Heatsink
Figure 13. External Heatsink Mounting Example (R
= 30°C/W)
th
9/12